Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: SYSTEM aka (Cyberpyrot) on July 06, 2008, 01:38:27 PM

Title: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: SYSTEM aka (Cyberpyrot) on July 06, 2008, 01:38:27 PM: (https://www.acidmods.com/images/PIC12F683.png)

https://www.acidmods.com/software/PIC12F683.rar (https://www.acidmods.com/software/PIC12F683.rar)

https://www.acidmods.com/software/PIC12C508A.rar (https://www.acidmods.com/software/PIC12C508A.rar)

Please no one use this file for monitary gain we offer free info for our members...
Title: Re: Basic Spit Fire for PIC12F683
Post by: SYSTEM aka (Cyberpyrot) on July 06, 2008, 01:40:12 PM: Cyber Emailed me this code he said he did not have an actual microcontroller to test it but he thinks it will work...
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: KingMike_OS on July 06, 2008, 07:23:29 PM: Just redownload password has been remove
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on July 06, 2008, 11:20:24 PM: can this be used on sixaxis?

oh and this is great, thanks a lot
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: zbblanton on July 07, 2008, 02:59:00 AM: so wait you dont need any crystal's cap or anything like that for this to work?
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: KingMike_OS on July 07, 2008, 05:40:48 AM: no crystal needed but you still need the 2 resisters on the switches
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: zbblanton on July 07, 2008, 11:13:17 AM: no way thats freaking awesome

so can u make like a pic16f88 like or is it only with these PIC because if u can that would be amazing
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on July 13, 2008, 11:42:46 PM: anyone confirm this fully working?

Quote from: KingMike_OS on July 07, 2008, 05:40:48 AM
no crystal needed but you still need the 2 resisters on the switches

which resistors are needed?
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: vwcr on July 14, 2008, 01:24:03 AM: i think i read on another post 10k resistors, my question is where do u put them?

Could people not just copy the consolecustoms tutorial?

Although they do use a 1.8k resistor and a transistor 2n3904
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: chriscwill07 on July 14, 2008, 11:48:11 AM: How would the wiring for the switches work out. I would really appreciate a diagram of wiring between the chip and the board. I only want to do the triggers so how could I wire it for that. Ive got a bet with friend that I cant figure out how to do this so I really need this diagram.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on July 14, 2008, 12:28:37 PM: Quote from: chriscwill07 on July 14, 2008, 11:48:11 AM
How would the wiring for the switches work out. I would really appreciate a diagram of wiring between the chip and the board. I only want to do the triggers so how could I wire it for that. Ive got a bet with friend that I cant figure out how to do this so I really need this diagram.

if you mean the wiring from the PIC chip to the tact switch, i think, according to others, it would be like this:

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi196.photobucket.com%2Falbums%2Faa209%2FNemesis_14%2FUntitledcopy.jpg&hash=892aef26fed51cf274c3d8873fb83e584c811649)

and if you mean where the ground(VSS) and the power(VDD) points are then here:

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi196.photobucket.com%2Falbums%2Faa209%2FNemesis_14%2Fground-1.jpg&hash=4e99288ad4e83a3bc043222d99d57c8d2325e101)

this is for wireless controller by the way, mine is a cg type board

and for the r trigger point:

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi196.photobucket.com%2Falbums%2Faa209%2FNemesis_14%2Frtrigger.jpg&hash=d8d76ea3649ee29de92915d415bc7175064631a2)

- so a wire pin 1 would go to ground point as pictured

- a wire from pin 8 would go to the power point as pictured

- a wire from pin 7 and would go to the r trigger point on the board as pictured

- a wire from pin 5 would go to a 10k resistor, then solder a wire from the other side of the resistor, this wire will go to one side on the switch your going to use for rapid fire (refer back to the drawn picture)

- then solder a wire to the other side of the switch and then solder to i think pin 1 which is ground ( correct me if im wrong)

turn on the controller and make sure everything is fine, if the chip gets extremely hot then a resistor is needed, maybe a 10k one

this is what i see and would do according to the diagram, i have not done this or tested this so i do not know if it works this way, it is just a rough guide according to what i see from the diagram. anyone correct any mistakes if i am wrong

thanks
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: vwcr on July 15, 2008, 12:40:11 PM: I have had no luck what so ever with these hex files tried both can anyone confirm they work and the information for wiring is correct?

Thanks
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: KingMike_OS on July 18, 2008, 06:53:04 PM: has any one use this hex code and got it to work yet on PIC12F683 ???

Must be working no one saying anything.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: gameroms on July 19, 2008, 06:41:21 PM: the pic 683 code isnt working, and ive tried everything i know. ill donate some 683's to CYBER if he'll try to get this working.

thanks
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: KingMike_OS on July 20, 2008, 08:07:35 AM: will i' got my chips yesterday .. i work on it tonight i should have one working by monday.

thanks for update
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: gameroms on July 20, 2008, 01:57:33 PM: i was gonna order a few kits from ebay for friends, but ill wait on yor hex kingmike, and if it works ill just make a donation to you.

would be great if the new buttons were on/off switches for rapidfire on the triggers.

also if you into making a special code for some one for a donation pm me.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: xbox modz on July 21, 2008, 12:16:12 PM: i bought a kit form ebay and the resister went on the trigger post and then to the tact switch. dont know if it would work for this one.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: unloopme on July 23, 2008, 10:08:16 AM: Quote from: SYSTEM on July 06, 2008, 01:38:27 PM
(https://www.acidmods.com/images/PIC12F683.png)

Hi there, can we use the following wiring tut, and simply replace the 1K resistors to 10K, or the 100K suggested in another post?
Thanks in advance.

http://25jubw.bay.livefilestore.com/y1pq1rqN0UfuDNDYK4qSZyrFKuKWX9psWesgN_BHYJucTo5SBcC2GXgq5YvzzG_KPq31BFFP7C2ro4/RFMT.pdf?download (http://25jubw.bay.livefilestore.com/y1pq1rqN0UfuDNDYK4qSZyrFKuKWX9psWesgN_BHYJucTo5SBcC2GXgq5YvzzG_KPq31BFFP7C2ro4/RFMT.pdf?download)
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: KingMike_OS on July 23, 2008, 10:57:38 PM: my Controller is working is just the chip was getting to hot and shorthing out the controller.

any way as of now i got 683 work but i have open pin problem that means the rapidfire is always

on can't be turn off so need some more testing i been working with 2 other people on this for 3 days

now so as of Now the code is no good and the will not work till i get some result.

This gose for both chip and hex file that was release.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on July 24, 2008, 05:34:50 AM: http://forums.xbox-scene.com/index.php?showtopic=656753 (http://forums.xbox-scene.com/index.php?showtopic=656753)

i'm assuming the guy pulled the code from the PIC, anyone test to confirm working? i dont have any PIC or even a programmer so i cant do it. though people on ebay say they have put hard work into making the code, that's a load of crap, most of them just pulled the code from someone else.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: KingMike_OS on July 24, 2008, 10:47:51 AM: yes i tested with some one it its very buggy ... it will fire 3 - 4 slow than pause than fire the rest of the clip very fast.

same result every time. when the switch is press its start very slow. most people will not release there working code

or lock there code since they have something to hide. like this guy consolecustoms and charge people $33.00 per kit that cost

no more than $5.00

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2Funtitled-2.jpg&hash=1949d5527aadb7d8cd1c4c1ce56c785edbdf6826)

here the update on 683 i have got it to work on a new style controller with only 4 wire and switch.

And here is the old style working same way 4 wire only ...
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: redryno1221 on July 24, 2008, 12:24:54 PM: nice work Kingmike_os thanx for working on it still even after all the problems....that ebay guy is an a**hole...
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: corby7 on July 24, 2008, 09:43:04 PM: Well the one guy from ebay uses a 1k ohm resistor, so I imagine that he has it programmed and set up the right way in his settings. By using a 10k ohm resistor, would that not let as much voltage to come from the switch? how could it then heat up? The one kit I have here that I have not installed in the controller has two tactile switches and the 12F683 chip ( but does it not matter what chip we use?) and the ik ohm resistors. Remember the resistors also have a tolerance rating. I am more or less grasping at straws here. But I do know the kits I was sent I installed 3 of them and they work fine, I think the program is fine but its the hardware were using here. I can't wait till I go to university for my electronics engineering course. This :censored: would be easy to do if I had it under my belt already and then I could help. Anyway could it not be the chip, there are like 7 different styles of the 12F683. If you want the info off my chip I can give you that. Let me know

Cheers
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: OpTiCz on July 24, 2008, 11:14:19 PM: Nice, is there an updated download?
I'm planning on buying my programmer next week and trying this out.
Fun Fun Fun. :hifive:
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: OpTiCz on July 31, 2008, 06:55:20 AM: So I ordered chips and the programmer.
Can someone tell me where I can find the wiring diagram for the 8-pin for the Older Wireless Board?
ConsoleCustoms has one on his site, but he's using a transistor which seems goofy...
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on July 31, 2008, 08:02:55 AM: Quote from: OpTiCz on July 31, 2008, 06:55:20 AM
So I ordered chips and the programmer.
Can someone tell me where I can find the wiring diagram for the 8-pin for the Older Wireless Board?
ConsoleCustoms has one on his site, but he's using a transistor which seems goofy...

https://www.acidmods.com/forum/index.php?topic=21354.0 (https://www.acidmods.com/forum/index.php?topic=21354.0)

wiring would be different to consolecustoms as it is a different hex code to theirs
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: OpTiCz on August 01, 2008, 07:14:22 AM: There's a conflict in the instructions.
I think PIN 1 is supposed to be Power, Pin 8 is Ground.
Regardless, this hex load on the chip, and I wired it up, though it doesn't work.

I'd be willing to donate 5 bucks if you can help me on this.
Can someone make a diagram like this; it might be easier to understand?

(https://www.acidmods.com/images/360/chip2.png)
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on August 01, 2008, 07:18:24 AM: its not really difficult, theres the pinout here, i'll explain it:

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi196.photobucket.com%2Falbums%2Faa209%2FNemesis_14%2FDigrams.png&hash=d1989e357b5a4a31d64fd293990ed4ae9a60263b)

solder a wire to pin 1, this will go to power.
solder a wire to pin 8, this will go to ground.
solder a wire to pin 5, this will go to one of the pins on your switch
solder a wire to the other pin on the switch, then solder the other end of that same wire to the r trigger point.

heres a few pics i made explaining where the power, ground and r trigger points are on the board:

power and ground as labeled

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi196.photobucket.com%2Falbums%2Faa209%2FNemesis_14%2Fground-1.jpg&hash=4e99288ad4e83a3bc043222d99d57c8d2325e101)

r trigger
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi196.photobucket.com%2Falbums%2Faa209%2FNemesis_14%2Frtrigger.jpg&hash=d8d76ea3649ee29de92915d415bc7175064631a2)
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: OpTiCz on August 01, 2008, 07:28:54 AM: Like I said in the 4 wire post your showing the picture for, I didn't have a problem with that.
It works fine.
It must be the hex then.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on August 01, 2008, 07:39:32 AM: Quote from: OpTiCz on August 01, 2008, 07:28:54 AM
Like I said in the 4 wire post your showing the picture for, I didn't have a problem with that.
It works fine.
It must be the hex then.

you talking about the hex i linked you to?
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: OpTiCz on August 01, 2008, 07:46:32 AM: No the Hex in this post.
Rapid fire and spit fire are two different mods from what I understand.
The hex in this post should enable and disable rapid fire by using the switch.
The 4 wire post, which works fine, just uses rapid fire by holding the switch.
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: Nemesis on August 01, 2008, 07:49:05 AM: well this hex has been confirmed that it isnt working properly already, kingmike left this to move onto the simpler 4 wire method. this isnt the original spitfire, this is basic as in other words rapid fire, dunno why the title says "basic spitfire"
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: OpTiCz on August 01, 2008, 07:53:37 AM: Ah OK, I thought he was still working on it.
So it sounds like there's no existing Spitfire for 12F683.
What program/compiler can I use to start writing programs?
I'd like to get into this....
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: dvalle07 on September 17, 2008, 08:34:44 PM: where can u get these pre-programmed
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: zamorak-9 on November 06, 2008, 10:59:28 PM: Quote from: SYSTEM on July 06, 2008, 01:38:27 PM
(https://www.acidmods.com/images/PIC12F683.png)

https://www.acidmods.com/software/PIC12F683.rar (https://www.acidmods.com/software/PIC12F683.rar)

https://www.acidmods.com/software/PIC12C508A.rar (https://www.acidmods.com/software/PIC12C508A.rar)

Please no one use this file for monitary gain we offer free info for our members...

do these codes work on both styles of controllers?
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: xboxbandit on November 28, 2008, 12:08:40 PM: Quote from: SYSTEM on July 06, 2008, 01:38:27 PM
(https://www.acidmods.com/images/PIC12F683.png)

https://www.acidmods.com/software/PIC12F683.rar (https://www.acidmods.com/software/PIC12F683.rar)

https://www.acidmods.com/software/PIC12C508A.rar (https://www.acidmods.com/software/PIC12C508A.rar)

Please no one use this file for monitary gain we offer free info for our members...

I did the pic12F683 from the tut section here and programed it myself and wired from the pictures and it did not work it connects on led1 but when I hit connect for the rapid fire 4 will not lite up and help plzzz
Title: Re: Basic Spit Fire for PIC12F683 & PIC12C508A
Post by: barrettr33 on September 16, 2009, 04:56:03 AM: Hello,
I clicked on https://www.acidmods.com/software/PIC12F683.rar (https://www.acidmods.com/software/PIC12F683.rar) and https://www.acidmods.com/software/PIC12C508A.rar (https://www.acidmods.com/software/PIC12C508A.rar)
The server would not allow it to open. Could you send me the hex file or the programming codes?
Thank you
barretr33@optonline.net