Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: Totonzio on July 08, 2008, 03:01:05 AM
-
hello acidmodders what is the resistor to knit on power board in order to upgrade the led green?? end for led wifi and memory? thanks
-
up help please
-
I'm thinking you might be looking for this..... Just an additional note. You have to connect the negative end of the leds to the a ground point that is on a switch (i recommend the wlan switch. It's not too hard), or they will drain your battery when it is off... I don't recommend using the powerboard but it's an easier way if its your first mod.
It will however dim the power led pretty badly but will still work fine..
if you mess up you can get a new(powerboard) one from dealextreme for like $5.00.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi299.photobucket.com%2Falbums%2Fmm282%2Fmikewkrc%2F4dp_powerboard.jpg&hash=5c0361163aa36547848a75be32cf56d8cb35e15b)
THANKS 4DP for powerboard info!!