Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: natedoggy94 on July 12, 2008, 04:03:10 PM

Title: Install LEDs with a switch?
Post by: natedoggy94 on July 12, 2008, 04:03:10 PM

can anyone please explain to me how to install a switch so i can turn my LEDs on and off?
I have a switch that is exactly the same as the memory/wifi switch and ive got the silver switch cover thingy that goes over the top of it. I was thinking about running my wires from the powerboard, up the right hand side, and then install the switch about 3/4 up the trim, there is alot of space inside the psp there, and then run the wires up the top and then to the triggers. sounds simple, but i just need to know how to install the switch

please help

Title: Re: Install LEDs with a switch?
Post by: ryan0 on July 12, 2008, 04:26:17 PM

use the search function young padawan

Title: Re: Install LEDs with a switch?
Post by: natedoggy94 on July 12, 2008, 04:33:13 PM

I did but i couldnt find a guide to follow. im a noob

Title: Re: Install LEDs with a switch?
Post by: Bhawan on July 12, 2008, 08:45:21 PM

u have to wire the leds either to the wifi switch or the hold switch ..... if u wire it to wifi u wont b able to switch the wifi off and if u wire to hold u will lose hold functionality(i think there is a new way in which u can keep it) ....

Title: Re: Install LEDs with a switch?
Post by: natedoggy94 on July 12, 2008, 09:00:50 PM

yes ive decided to install the LEDs onto the Wifi switch. So, all i have to do is scratch the trace off the bottom leg and then bridge the top two legs then solder my negative (-) wire to the bottom leg? am i right?

Title: Re: Install LEDs with a switch?
Post by: folklord36 on July 12, 2008, 10:41:25 PM

no you dont need to cut any traces just bridge the top two and soler to the 3rd pin