Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: proaudiosoft on July 23, 2008, 10:42:07 AM
-
I have been reading this site past couple days and decided to try the rapid fire mod with a 12f683 pic. I have several of these lying around because I mod alot of wii's and such. any ways I was digging in to my controller but it looks as though the project on this site hasnt been confirmed working, looks like a moderator says the controller ppoped out on him after 5 minutes of play and he was gonna try a 100k resistor on the hot side, did this work? is this a working project or is it still in R&D? Also, did this controller die for good, or just screw up momentarily?
-
I think the pic just died and as soon as I get my programmer I'll try this to confirm it works.
-
my Controller is working is just the chip was getting to hot and shorthing out the controller.
any way as of now i got 683 work but i have open pin problem that means the rapidfire is always
on can't be turn off so need some more testing i been working with 2 other people on this for 3 days
now so as of Now the code is no good and the will not work till i get some result.
This gose for both chip and hex file that was release.