Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: DntTryMe on July 26, 2008, 01:18:45 PM
-
Heyho guys!
Okay, hands down.. There are tons of topics like this one, but I just read 10 pages full of topics and the search function didnt help either... Soooo, if I know the answer you can go ahead and delete the topic! ^^
As the title hences, Im doing a UMD door mod. Just dremeled a nice window + engraving. And I have a couple of LEDs in front of me, 3mm 3000mcd, running at 3V/~20mA.. My question: Where to I solder them onto? I already have two SMD LEDs soldered to the speakers (sensitive L/R pad mod), sooo..?
-
You can solder them to the speaker too if you want them sound reactive. Or just wire it to the powerboard.
Ill get a pic 1 minute
-
Hey cool thanks! Ive heard soldering them onto the mobo is not so easy for a noob.. :/ I opened my PSP (well actually my cousins PSP) yesterday for the first time.. ^^ And is it true that its getting critical if I solder more than 4-6 LEDs onto the speakers?
-
Its not really gonna do much.
Some times it just not as bright or as sound reactive but from when ive done it the noob ways it fine with 4-6
Good luck
Also is your UMD drive still in??
-
don't know if having too many will cause any problems, but the speakers may not be as loud. Most people would suggest using a LM386 amp. Its a lot more complicated but people say it produces better results.
-
i know instead of the sound reactive and wasting the power to his speakers even more he can do the trigger mod
here a image of what he can do...but it says 10 ohm but idk with the leds u have u may need different resistor...
correct me if im wrong anyone...
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.llamma.com%2FPSP%2Fimages%2Fmods%2Ftriggers%2Fpsp_le4.jpg&hash=85e132f98904937c5a72ef4c64f51baafb80af71)