Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP Phat (1000) => PSP's => PSP Duel Nub. => Topic started by: longcat1 on July 28, 2008, 01:09:17 PM

Title: razor x question
Post by: longcat1 on July 28, 2008, 01:09:17 PM

ok, i figured out how to assemble the spring nub but is there a way to stick the razorx to the nub because the spring causes the board to pop out. :confused:

Title: Re: razor x question
Post by: 4dP on July 28, 2008, 01:10:47 PM

balloons rubber bands elastic

Title: Re: razor x question
Post by: anthonyta on July 28, 2008, 01:58:15 PM

Quote from: Alien_X on July 28, 2008, 01:22:33 PM

Do you mean in the sense of keeping the casing together , tight with the board?

if so

I find melting the plastic legs onto the razor board, and then hot-glueing together works best, or you could use blue tac

yup

Title: Re: razor x question
Post by: longcat1 on July 28, 2008, 02:33:13 PM

ooooo ok ill try thanks :D

Title: Re: razor x question
Post by: longcat1 on August 22, 2008, 10:41:28 PM

okay, now i have a problem. i went 2 solder the razor board but when i used iron and wire, after it harden, it fell off with the litte pad. so i soldered directly to the dot and it made that fall off. i used flux and i have soldered many things befor but this takes the cake, and my razor board... :cry2: