Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: ra1n on July 28, 2008, 06:46:43 PM
-
its my first time trying to do a hold active led, so i think something is wrong somewhere
ok so i followed this picture here:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi230.photobucket.com%2Falbums%2Fee18%2Fteh_0verl0rd%2Fholdleds.jpg&hash=0470b6207fd43f461ae5ab898010520d0098b459)
but my power board is different, instead of the 4 holes its 2. i still tried the hole but it didn't work so i tried the positive point as shown in this picture:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg265.imageshack.us%2Fimg265%2F9026%2Fpowertoppj9.jpg&hash=8852361964ee8863312afb3322b2b0d5dd95d0c6)
still nothing. If i try only the the led mod without connecting the negative to the switch then it works.
I'm out of ideas here :sadno:
-
Can you take a picture of your power board so we can see what you are talking about ?
If you show me I can take the image and mark on it how to wire it or at least
where I want you to test.
-
you probably didn't cut the trace which disables the hold function ;)
you will need to cut it otherwise the led won't turn on because it won't get any power.
-
you probably didn't cut the trace which disables the hold function ;)
you will need to cut it otherwise the led won't turn on because it won't get any power.
? is the hold still a ground and the reason we tell people to remove the trace is to still have the functionality of the psp while using the switch for the leds
-
hey not to say ur stupid or anything but make sure u have the hold switch down lol maybe ur forgeting to put it down? :dntknw:
gotjumbo911
-
you probably didn't cut the trace which disables the hold function ;)
you will need to cut it otherwise the led won't turn on because it won't get any power.
? is the hold still a ground and the reason we tell people to remove the trace is to still have the functionality of the psp while using the switch for the leds
i did, but i might not have cut it all the way, i'll try it again
hey not to say ur stupid or anything but make sure u have the hold switch down lol maybe ur forgeting to put it down? :dntknw:
gotjumbo911
at 1st i did, but i remembered
-
the multimeter is your friend
-
She tested it lol it was a - point. It makes no sence
-
idk how to use one...
i tried but i'm not sure if i was right said it has a - charge
and i check the cut traced again, the hold function is definitely cut, still nothing
-
nope, i check it without the the hold and it works fine
-
you switch the "digital" multimeter to continuity
-
the psp turns on, everything works the hold function is gone, and i have no idea what you're talking about with the multimeter
edit: it turns on but won't turn off :boxed:
edit2: it has something do with the hold, cause i disconnect the - part of the led and now it turns off
-
I believe he is refering to this http://cableorganizer.com/triplett/digital-multimeter/digital-multimeter-article.html (http://cableorganizer.com/triplett/digital-multimeter/digital-multimeter-article.html)
Explains the multimeter and digital thing. Hope that helps.
-
ya multimeters come in handy on more than one occasion. It dosent have to be a fancy one either. I got mine second or third hand at a swap meet for 10 bucks. Its pretty old but its digital and it gets the job done.