Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP Phat (1000) => PSP's => PSP Duel Nub. => Topic started by: longcat1 on July 29, 2008, 02:01:56 PM
-
so how do u fit the board in there? the screw thing is in the way and the board is overlaping some of the x button. :confused:
-
you gotta dremel that out....
-
you gotta dremel that out....
what he said......lol,i recommend chopping what you dont need from the powerboard,theres actually alot u can take off without interfering with the buttons,it makes it much easier than not cutting the pwoerboard,also cut the screwhole on the faceplate,dremel a square for the analog nub to fit snugly into the faceplate,chop out the clip that holds down the bottom of the powerboard to the backplate,basically chop what you can
-
awww i dont have a dremel, o well i guess i can cut and sand for a year, thx for the help :D
-
if your really careful you can melt it with your soldering iron
-
well i managed to cut it with an xacto so yay but does anyone kno how to make a good hole cuz i tryed drilling but i lost a faceplate :cry2:
-
well i managed to cut it with an xacto so yay but does anyone kno how to make a good hole cuz i tryed drilling but i lost a faceplate :cry2:
ehh well this is where the dremel would come in, i would guess you draw a circal the best u can and dremel that out, or maybe you could melt a whole wit ur iron and sand the melted part out? lol
-
You eitehr need a dremmel or a mill to cut that out. I would suggest sending it to somebody. I got a faceplate from ryan0 cut on his milling machine it was perfect :P