Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: PspKicks316 on August 02, 2008, 10:52:28 AM
-
...how I can change this so there's no push buttons and it's only an on/off switch to turn it on? I'm guessing get rid of those buttons and put a switch on the gnd or 5v?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fcparsell.googlepages.com%2FRapidFireEasy.gif%2FRapidFireEasy-full.jpg&hash=d6cf03f1963f50be4f85af3febca17181504daac)
...and how do you tell the orientation of a diode? The side with the black line is the + I guess? And the pot I have, on 1 side there's 1 leads and the other side there's 2 leads. I'm guessing I'm using the single lead and either on the other side?
-
just leave out the momentary switches and connect with a wire(obviously). and add the on and off switch to the 5volt + wire.
-
I HAVE read lots more on this topic, but just to make sure, and clear confusion. This is a NORMAL 555 timer, correct?
-
You CAN'T use a normal 555 timer. You need to use a low power CMOS 555 timer