Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: bluedog on August 04, 2008, 09:10:24 AM
-
Ok, I bought a chip and two tact switches on ebay for $10 which I think is a pretty good deal. He said the rate of fire is 24 shots per second. Does it matter whether I use a matrix or Cg board or is the hex the same? Also, I bought an IC holder because I didn't really want to solder directly to the leads so I wanted to know if I should match the notches.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi266.photobucket.com%2Falbums%2Fii266%2Fjdmj101%2FDSCI0073.jpg&hash=bed416d0369b903ebb2068c4a559df05d79202f4)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi266.photobucket.com%2Falbums%2Fii266%2Fjdmj101%2Fmicrochip.jpg&hash=a6b6cecb863e5509beb1382963d1c2a3fd1e0cd2)
Also, it says to use this point for positive and ground.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi266.photobucket.com%2Falbums%2Fii266%2Fjdmj101%2Fpowerfor12f683.jpg&hash=3389e8fac348adece5f748fa7d631ec68e10faad)
Can I use this point instead for positive and another or the same point for ground?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi266.photobucket.com%2Falbums%2Fii266%2Fjdmj101%2FDSCI0074.jpg&hash=88235bbb757b389a45f0ba4493a2d153e1951b9b)
Thanks
-
Yes, you should match the notches...just makes it easier to remember once you solder it in. And those points for power and ground will work. I have the new board and I soldered it like it is pictured in your second pic.
-
post link to auction and ill give you the info you need, i need to read the auction to help you.
if you use positive in the 1st pic it will allways have power on the pic, even when controller is off.
-
don't need help anymore. Installed perfectly without any trouble :hifive: