Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: rinsaku on August 05, 2008, 03:19:03 AM

Title: Led Light under a button...
Post by: rinsaku on August 05, 2008, 03:19:03 AM

Im planning on putting a led on my O button...

do you think I can do this? and yeah /\ X and [_] will be normal buttons...

Title: Re: Led Light under a button...
Post by: tmandt on August 05, 2008, 08:52:39 AM

yes you can do it. this has been done many times

Title: Re: Led Light under a button...
Post by: l0rdnic0 on August 05, 2008, 10:13:18 AM

Look in the TUT section I have one posted up there.. :#1:

Title: Re: Led Light under a button...
Post by: rinsaku on August 05, 2008, 06:03:24 PM

ummm... Im thinking of where I could put my led...

and I dont want it to be sound reactive... and I dunno where should i put it.. and Im thinking where I gonna drill on my button...xD

Title: Re: Led Light under a button...
Post by: Sanctus on August 05, 2008, 09:46:24 PM

Quote from: rinsaku on August 05, 2008, 06:03:24 PM

ummm... Im thinking of where I could put my led...

and I dont want it to be sound reactive... and I dunno where should i put it.. and Im thinking where I gonna drill on my button...xD

Do some research, it's all been done.

Title: Re: Led Light under a button...
Post by: rinsaku on August 06, 2008, 01:01:54 AM

yeah I already saw it... So I just need a 40 ohm resistor if I gonna make a direct wiring for my O button to be non reactive on a 5v points...

so L&R leds will go with the LM386 on the Anode + and my unreactive O button will go to either 3v or 5v with 40 ohm resistor on power switch board?

and All of my Cathode will get bridge to the wire of Wifi Switch...

I am just thinking where does the Ground pin on LM386 goes?