Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: moeiscool on August 05, 2008, 10:19:36 PM

Title: No Chip Rapid Fire Wired?
Post by: moeiscool on August 05, 2008, 10:19:36 PM

can you use a wired controller for rapid fire?

Title: Re: No Chip Rapid Fire Wired?
Post by: gameroms on August 06, 2008, 06:23:50 AM

yes you can, will be tested soon as king mike gets a wired controller.

Title: Re: No Chip Rapid Fire Wired?
Post by: SillyNuts on August 06, 2008, 08:10:08 AM

iv tested it for mike allready and yes you can ill be posting the vids tommro.

Title: Re: No Chip Rapid Fire Wired?
Post by: swxc86 on August 06, 2008, 02:21:43 PM

yes please help, ive got wired controller and idk if it works on the new controller

Title: Re: No Chip Rapid Fire Wired?
Post by: moeiscool on August 06, 2008, 08:04:17 PM

i tested on two models
and neither worked im so confused

Title: Re: No Chip Rapid Fire Wired?
Post by: Blazinkaos on August 08, 2008, 01:28:28 AM

did you bother looking at the thread that presented the no chip for rapid fire to see if its the same mother and if you did it right...

Title: Re: No Chip Rapid Fire Wired?
Post by: KyleP on August 08, 2008, 07:58:30 PM

yes its not much different from the wireless just the dum stuff like its wireless etc

Title: Re: No Chip Rapid Fire Wired?
Post by: Blazinkaos on August 08, 2008, 08:14:17 PM

I kno but from wat i read it amy be a different motherboard,,,

Title: Re: No Chip Rapid Fire Wired?
Post by: SillyNuts on August 09, 2008, 02:06:50 AM

ok check it it will work all you have to do is add a res so it cuts down the volts some.. on a wireless if you notice you have to use low batteries cuz it cant handle 5v so on a wired controller you have to use a 100k res to cut it dont a lil cuz a wired controller is a constant 5v feed