Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: pspklant on August 08, 2008, 10:59:37 PM

Title: LED-mod problem....
Post by: pspklant on August 08, 2008, 10:59:37 PM: Hi,

I have just installed LED in my psp, 2 backlights, a trigger mod and 1 on the left of my psp and one on the right... Evrything went well untill I want to install the faceplate. At one moment all LED's turned of and also the powerLED doesn't work anymore....

When I deconnect the wires from the powerboard, the powerLED doesn't light up....

Can anyone please help me????

Thanks in advance!
Title: Re: LED-mod problem....
Post by: gx4702 on August 08, 2008, 11:28:53 PM: um what do you mean by Backlights?
and i had the same problem, all i did was take the battery out, wait 5 seconds and plug it back in and it was fine

um and Switch the Ribbon for your Powerboard (the one that connects the powerboard to the motherboard) - Tip That Worked From 4dp
Title: Re: LED-mod problem....
Post by: pspklant on August 08, 2008, 11:40:53 PM: Backlight=2 LEDS on my UMD door;).

Ok I will try to replace the ribon cable!

Thx!
Title: Re: LED-mod problem....
Post by: Jumbo on August 09, 2008, 01:43:53 PM: Sounds like a short somewhere.

Make sure no random solder.

Or your psp died.

Static is a PSP Killer.

Where u wearing anti-static wrist band?
Title: Re: LED-mod problem....
Post by: Nemesis on August 09, 2008, 01:52:26 PM: its the ribbon cable, replace it or better yet, solder a wire from the 5v point on the motherboard over to the + point on the powerboard.