Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: numberoneshotta on August 09, 2008, 02:46:33 PM
-
will some on plzz :beg: tell me how put my own speaker on the psp.i want to take out the umd dirive but i can still play iso&cso :psp: can i get a video or a good description with pictures
-
um, ok if you want to take out the original speakers and put in ur own then yea ok fine just solder it to the connections.
If you want to put in ur own speakers AND keep the original speakers then you will need a LM386 so that you can draw more power to the speakers. If you dont have the LM386 then your speakers will make the same amount of volume as originally without the extra speakers.
And if you take out ur umd drive you still can play iso/cso since your using ur memory card.
Hope you can understand it.
Gx4702
-
all i wanna do is take out the oringinal then put in a new 1 but i am a noob to these stuff so plzz explain better
-
Just cut the wires to the original speakers and solder to them and extend them into the umd drive and solder your new speakers to the positive and negative black will be negative and grey is positive you can even unplug them to solder on them so you don't have to put a soldering iron any where near anything that's connected to the psp
-
thx i will see if it works :w00t:
-
remember tho, this will be a mono speaker so if you wanted stereo you would have to add another speaker or keep one of original ones. Hope it goes well! :tup:
-
I expect to see pics here by the end of the day get to work :hifive: also if ur interested in amplifying the speakers with a simple circuit order this http://www.vakits.com/product_info.php?cPath=43&products_id=321 (http://www.vakits.com/product_info.php?cPath=43&products_id=321) this kit has all the parts you will need to make amp in smd form including 6 smd lm386 and 2 8ohm speakers this kit is well over 30 dollars in parts and all togeather about 300 piece kit with this kit you can make the dual power stero amp im making and 4 smd sound mods with resistors and still have over 200 very useful smd capacitors ,resistors and transisters leds and some pots and speakers for 8 dollars that's a good deal shipping is 5.
remember tho, this will be a mono speaker so if you wanted stereo you would have to add another speaker or keep one of original ones. Hope it goes well! :tup:
hmm im not too sure about that if he has only 1 big speaker he plans to use then i think he can bridge them for more power you should try that i see no reason why it wont work
-
hmm im not too sure about that if he has only 1 big speaker he plans to use then i think he can bridge them for more power you should try that i see no reason why it wont work
I suppose, i can't say i've heard someone cross them and blow up there psp. that would be funny tho.
-
No it woulnt be funny :sadno: note numbeoneshotter i have crossed the connections to the speakers the sound will be disabled untill you take the battery out of the psp and but it back in and restart the psp so if by accident this happens don't freak out just try turning it off and on and it will be fine ive done that many times myself but i have never tried bridging positives and negatives of both speakers to power a bigger speaker but im interested to see if it works so plz kepp us posted with your results
-
could u all plzz speak english lol i dont noe anything u all saying
-
No it woulnt be funny :sadno: note numbeoneshotter i have crossed the connections to the speakers the sound will be disabled untill you take the battery out of the psp and but it back in and restart the psp so if by accident this happens don't freak out just try turning it off and on and it will be fine ive done that many times myself but i have never tried bridging positives and negatives of both speakers to power a bigger speaker but im interested to see if it works so plz kepp us posted with your results
Sorry, that was suppost to be sarcasem, lol.
-
alphex i want t0o take out the oringinal and put in a new one so wat is the way that u do it
-
Folklord's info is correct. remove the original psp speakers (you can either unplug them or cut them from the wire. so you can solder the wire from your larger speaker to that rather than the mobo). Thats it. make sure the wire is not shorting anywhere and you will be fine. like i say before it will be mono, not stereo. you might be able to cross wire the two old speaker connections to get a simulater stereo sound but i've never done that and might cause problems. so for now just wire the speaker to one of the psp speaker ports.
later you could try and find some smaller yet more powerfull speakers so you can have true stereo. i've been told that a set from a sony erricsson speaker set are beeter as you can have both where the umd drive would be. hope that makes sense and feel free to ask more questions.
-
where to find the old speakers sorry i am a noob i cant even get past the lcd screen thee stupid start buttoms wont come of???? :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :help: :cry2: :hifive:
-
there under the lcd and the metal frame that hold the screen inplace. It will be very clear where they are when you have removed those parts. i'd recommend studying the tut on taking apart a psp in the tutorial section at Acidmods. helped me alot when i first started.
-
to take the homebar off, just use a flathead screwdriver and pry it off from the left side.
-
look at some you tube vids of disassembley instructions
-
hmm im not too sure about that if he has only 1 big speaker he plans to use then i think he can bridge them for more power you should try that i see no reason why it wont work
i could be completly wrong but i was under the impression you cant bridge two channels of the same wattage and increase the wattage just the amps and if the watts dont go up the volume dont increase, i think it also changes the ohm rating,if you hook up left and right channels to the same single coil speaker there is some music that can cause the speaker to tear or blow because the left and right channels conflict(there is a nine inch nails cd that warns you not to listen to it on a mono system or it can cause damage to your speakers)but if you can find a duel coil speaker it should work great..but like i said i could be completly wrong
-
is the speaker under the lcd screen or do i have to go farder
-
take the screws in the battery compartment out and all the screwes under the lcd on metal case then open the umd door and wiggle the metal caseing out you have to open the umd door to take the metal caseing off then on the botom of psp will be your speakers plugged into mobo now to put speakers in the umd drive space you will have to take the umd drive out so you have to keep removeing all the screws until no electronics remain then remove the umd door and fab ur speakers onto it then put it all back together. look for tut on how to disassemble the psp they are everywhere
-
whats a mobo
-
Mobo=Motherboard....
Wow.
Edit -
Read This-
https://www.acidmods.com/forum/index.php?topic=13466.0 (https://www.acidmods.com/forum/index.php?topic=13466.0)
-
ok i am :censored: pised cuz i have to go throw alot to get out the umd drive :huh:
-
What you are the only :censored:ing one?
We all know what it is like to get the UMD Drive out.....
-
ok people i got out my umd drive finally so i want to noe where is the speaker to take it out and where to solder the new speaker and my wires are red and black :hifive: :help:
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi278.photobucket.com%2Falbums%2Fkk99%2Fgotjumbo922%2FTut%2520pics%2520for%2520JF%2Fspeakers.jpg&hash=9b22fe0bcbac68fd5f9d124a82e1343cd6aef3ca)
-
um speakers are at the bottom of the motherboard...shouldnt be too hard to find..since all you do is look for the speaker holes?
-
plus if you got your umd drive out that means you unplugged the speakers soo you had to literaly touch the wires to them and we described where they were so how can you not know where they are you allready unplugged them?
-
my screen is :censored:ing blanck wen i turn on my psp sound comes but the screen is black wtf to do and i dont still noe what to do with the speakers
-
u mite of not plugged the back light in properly, go out in the sun and see if there is anything on the screen.
-
Ya backlgiht problem.
Make sure u didnt brake it and if u did good luck lol
Tape is the best way.
But push it down and see.
or as gx said go into the sun and move it around until you can see something,
-
i got it to work :clap: but now my :censored:ing psp faceplate wont go back together & my :censored:ing brother hit over the things with the screws and lost them :sadno:
-
how 2 noe which part is positive or negative
-
Just test it....
Put the 2 wires ont he back of the points of the speaker and you will know... :x:
Dont double post!
-
so how do i remove the oringinal
-
Are you saying you dnt kno how to remove the wiring from speaker.
-
yes :faint:
-
I suppose ur new to this..ok well what you need is a soldering station...that heats up solder...you can get on at radioshack.
Get either 15-20 watt solder gun...
If dnt kno how to solder either I will find something or the AM members will help you out.
-
yes i am new i have a soldering iron and i noe how to solder but i just dont noe what to do with the speakers
-
Heat up the joint...
Then solder the other wires to it..
-
not that kind of help give me vid or pictures
-
Its real easy jsut solder the wires where u see the solder on the speaker dnt matter wat kind of wire..
-
hi i have a problem to do with this. im not new to modding just need sum help. so i have a speaker,and my psp (which is in pats, but i will put itback together.) so what do i do now?? :dntknw:
-
hi i have a problem to do with this. im not new to modding just need sum help. so i have a speaker,and my psp (which is in pats, but i will put itback together.) so what do i do now?? :dntknw:
this has been explained lots of times before. take out the umd drive, next dremel out a hole in your umd door, fit the big speaker in the door, solder the two wires from the big speaker to the contacts on the psp speakers. the picture showing the positive and negative points is 1 thread below this one in the same section it was started by the same guy.
-
(https://www.acidmods.com/forum/Smileys/default/locked.gif)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg41%2Fcwn723%2FSPEAKER.jpg&hash=b8796152bb89192e2bd9500bce04750b768058e6)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg41%2Fcwn723%2FSPEAKER2.jpg&hash=67527bab5525a365ecea2c558d3c3a2ff71b5f74)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg41%2Fcwn723%2FUntitled-2.jpg&hash=2016f7be906e71a9408f3bb1d7e8bbf94e198544)
Dont :censored: about the size, i was too lazy to resize.
-
lol u help me alot
-
There case is solved (finally) :wacko: