Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Winterz117 on August 17, 2008, 10:25:22 AM
-
ok i just bought the stuff for sillynuts's mod. im jsut gona go eat lunch quick then ill start right after. ill be taking some pics to show u guys. once my parts arrive, i will also be doing a bunch of LED mods. wish me luck! :yess:
oh 1 thing: can sombody please tell me what a jumper is???
2. Solder jumpers from pin 2 to pin 6, and a jumper from pin 4 to pin 8.
heres the really big and blurry pics
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010076.jpg&hash=19d4054032dbc29ed9f1e5333aeb8df8fc631502)
burnt my finger
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010077.jpg&hash=7d31eabfc632c07ae2fcdd9907297e8b39c9bc70)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010081.jpg&hash=25f2f040ea25eecdb1a3f9a69f6be5573f52947f)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010095.jpg&hash=8c6b93a10aad0e99299cc241b5c8f1173dfff4f4)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010090.jpg&hash=a483919026f2ea55c4eb48456190dd4430357e24)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010096.jpg&hash=dbf89640c3fc74ef542a7f71ff7b4edfe8547b63)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010099.jpg&hash=03da1867c2c3c906e5f6c5d9ec0dc9edad959e9e)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi247.photobucket.com%2Falbums%2Fgg123%2Fturtlepirate%2FP1010101.jpg&hash=151602f9026f1fbe98d82dca7f2ad8cc8a3b3113)
-
Just solder a wire to those pins...connecting them...it's not hard...
-
ok thanks man i just wanted to make sure
-
Anytime, if you have anymore trouble just post here.
-
ok i cant figure out which legs to use on my tact switches can sombody show me? there the 9.5mm ones
-
Test, and test again. That's what most people do. I don't think there's a sure fire way to find which leds connect. So just test.
-
hey if you need any help just ask and after you get done make a vid and post it in my thread if you dont mind
-
ok will do im just connecting the chip to the board now
~k just tested everything before i put it together and it works fine so far. every once in a while you get really sporadic fire but most of the time its consistent. once i finish putting everything back together ill post some pics in the first post