Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: john_da_gun on August 29, 2008, 03:05:07 PM

Title: help
Post by: john_da_gun on August 29, 2008, 03:05:07 PM

the clip holding my screen cord in, broke off now the picture aint all that good wot do i do?

Title: Re: help
Post by: FaT3oYCG on August 29, 2008, 03:14:21 PM

use the search button (screen connector / broke screen connector) in the psp forum section with the check box

but the most obvious answer will be wedge a peice of paper in with the ribon and it will push it down onto the contacts.

Title: Re: help
Post by: Jumbo on August 29, 2008, 03:14:59 PM

Screen Cord??

LOL

It aint good cause its not making the best contact u can put tape in it to hold it down better or buy a new clip or mobo.

Title: Re: help
Post by: Sanctus on August 29, 2008, 04:55:38 PM

Quote from: gotjumbo911 on August 29, 2008, 03:14:59 PM

Screen Cord??

LOL

It aint good cause its not making the best contact u can put tape in it to hold it down better or buy a new clip or mobo.

Where do you buy new clips???

Title: Re: help
Post by: Tri-edge on August 29, 2008, 05:53:01 PM

I think digikey has them.  I think sparkfun might have some too.

Title: Re: help
Post by: Jumbo on August 29, 2008, 07:49:16 PM

ya sparkfun 

I think other places have them too just gotta look

Title: Re: help
Post by: rceckspurt13 on August 29, 2008, 09:52:46 PM

Ya the link for the new connector on sparkfun is this: http://www.sparkfun.com/commerce/product_info.php?products_id=8355 (http://www.sparkfun.com/commerce/product_info.php?products_id=8355)

hope this helps.

oh yeah, solderibg iron, flux, and smallest solder(.015 works) are needed to replace it.