Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Electronics Projects => Topic started by: zbblanton on September 01, 2008, 02:30:50 AM

Title: LM386 IC board
Post by: zbblanton on September 01, 2008, 02:30:50 AM

I made this board because i really liked the board Alien_X made but i didnt have smt lm386s and smt resistors so i created one that's smaller then a penny but also has IC holes.

Here is the comparison picture(my phone camera sucks):
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi180.photobucket.com%2Falbums%2Fx218%2Fzbblanton%2FPIC-0037.jpg&hash=df0ec2d2d890dbaea149adbbac44d8a0649188a2)

Here is the files:
The schematic:http://www.mediafire.com/?hhganajajga (http://www.mediafire.com/?hhganajajga)
The board:http://www.mediafire.com/?naa44agfaaa (http://www.mediafire.com/?naa44agfaaa)

Title: Re: LM386 IC board
Post by: zbblanton on September 01, 2008, 03:46:50 AM

Quote from: Alien_X on September 01, 2008, 03:04:11 AM

NICE!

But, it doesn't work :(

The bottom traces aren't connected to the top player pads, - use a via.
And you could do it with one side and it would be same size if not smaller

well done buddy.

I don't get what u mean all the wires are connected to the pins

Title: Re: LM386 IC board
Post by: zbblanton on September 04, 2008, 06:21:36 PM

Update:

I added another ground pad so u wouldn't have to have two wires on one pad and it didn't effect the size at all.

so heres the new files:
Schematic:
http://www.mediafire.com/?xylgpliljem (http://www.mediafire.com/?xylgpliljem)
Board:
http://www.mediafire.com/?aablgcbdsdp (http://www.mediafire.com/?aablgcbdsdp)

i made three of these boards and they came out awesome.
here the picture:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi180.photobucket.com%2Falbums%2Fx218%2Fzbblanton%2FPIC-0040.jpg&hash=a98f013ad5ac692a7244b0e39b705c560213b59c)