Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: buickgnx on September 12, 2008, 02:43:46 PM
-
how do you make it look like theres to things like this. http://i139.photobucket.com/albums/q307/tmandt/DSC01983-1.jpg (http://i139.photobucket.com/albums/q307/tmandt/DSC01983-1.jpg)
-
You solder 2 wires to it?
LOL you got lots of questions dude.
He did it in Parallel which is of coarse fine. I use Series more often now which i think it easier.
Now looking at that pic, Tmandt did a really bad job. There is like 3 feet of wire on each led :fear:
-
so how do i do it?
-
so how do i do it?
the same way anyone else would
-
solder um to your speakers lol :laughing:
https://www.acidmods.com/forum/index.php?topic=22685.0
or you can do it this way to not as cool tho
https://www.acidmods.com/forum/index.php?topic=18429.0
-
Just solder each led to wire and solder to the powerboard like normal. Just so you know series is easier :yess:
-
Just solder each led to wire and solder to the powerboard like normal. Just so you know series is easier :yess:
Wouldn't the LED be not as bright if in series?
-
Just solder each led to wire and solder to the powerboard like normal. Just so you know series is easier :yess:
lies i found it to be hard as shi-
-
paralell is better because the leds are given a equal current, meaning they are the same brightness. Just scratch a bit of the insulation paint off these two spots on your powerboard and solder a 10 ohm resistor to one side, then solder on you leds.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg265.imageshack.us%2Fimg265%2F9026%2Fpowertoppj9.jpg&hash=8852361964ee8863312afb3322b2b0d5dd95d0c6)
-
You solder 2 wires to it?
LOL you got lots of questions dude.
He did it in Parallel which is of coarse fine. I use Series more often now which i think it easier.
Now looking at that pic, Tmandt did a really bad job. There is like 3 feet of wire on each led :fear:
why i did that? these werent only for triggers i made them long enough so the customer can put it where he wants. not everyone wants triggers smart ass
LMAO
-
i want my power boards and jewel. i hate ike. :x:
-
i want my power boards and jewel. i hate ike. :x:
i do too
-
I wouldn't recommend wiring led's in series.
Many many reasons.
why?
-
because the leds would lose power the futher down the wire you go. the first one would have full power then for every one after that in that setup would have reduced power to use. therefore they won't be as bright at the one before it.
-
Well i like to sometimes :cool: Less wire on the powerboard makes it easier.
But if I'm doing something like direct contact leds on the phat i use parallel all the wayyy.
Jumbo