Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: treemty on September 14, 2008, 07:06:05 PM

Title: my idiot self problem
Post by: treemty on September 14, 2008, 07:06:05 PM

So I have done two rapid fire mods they work great I also did a led swap on one of my controllers and while I was doing to the other one...the contact came off so I scraped off the paint and it didnt work I cant figure aout how to fix it now and my otherr problem now is when I was putting the controller back together the battery thing contacts with the spring just fell right off :faint:
AND I FEEL LIKE AN IDIOT FOR DOING THIS
so if anybody could please help me I would be oh so thankful!!!
If it is not fixable I will have to buy play and charge :fear:
Thank you

Title: Re: my idiot self problem
Post by: Winterz117 on September 15, 2008, 11:53:25 AM

which player led contact came off? and was it the ground or the power contact?

Title: Re: my idiot self problem
Post by: PspKicks316 on September 15, 2008, 12:29:09 PM

Uhm. Wow. Solder the battery contact thing back on, and scratch harder for the trace. It takes a slight amount of force from my experience. Worst case just solder the the via for the trace.

Title: Re: my idiot self problem
Post by: treemty on September 15, 2008, 12:47:24 PM

power contact for third player also it made my 4th player not work?

Title: Re: my idiot self problem
Post by: Winterz117 on September 15, 2008, 02:59:59 PM

ok this is an easy fix just solder a wire from the power on player one to the power of player three then both will go back on. player 3 going out broke the sequence to 4