Acidmods

AM After Hours => Modding Classes => AM nostalgia => Class Request => Topic started by: LaserShark on September 16, 2008, 04:15:34 PM

Title: Sound Mod Wiring [Read Post]
Post by: LaserShark on September 16, 2008, 04:15:34 PM

I know that there are tutorials for the reactive sound chip. But what I need is where and how to solder the wires to the switches that allow to change the modes of the LEDs. AKA on, off, and pulsing. I appreciate any help. :]

Title: Re: Sound Mod Wiring [Read Post]
Post by: Jumbo on September 19, 2008, 02:15:38 PM

Its only On (When on they are always pulsing) or Off and you wire to the wifi or hold switch.

Title: Re: Sound Mod Wiring [Read Post]
Post by: pm666drummer on November 27, 2008, 01:04:21 PM

i know this topic is stale BUT perhaps if you add one of those faders from sickmods, it might be able to make it change modes. not sure though.

Title: Re: Sound Mod Wiring [Read Post]
Post by: ryan0 on November 27, 2008, 04:21:03 PM

a tri-pole switch would do the job