Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: Rory on September 20, 2008, 10:13:08 AM
-
Problem:
Most of you who have bought Guitar Hero 3 with the sleek wireless guitar may notice after a few months that the colored buttons stop working and/or cut after pressed.
Reason:
This happens because of the pins on the guitar end wear away a hole in the contacts on the PCB in the neck of the guitar.
Solution:
Just stick a blob of solder on each of the contacts on the PCB, so the circuit can be complete blah blah blah.
Just done it and got a wireless guitar out of it :P. I'm gonna do it for a mateand maybe get like £10 out of him :P.
My Wii guitar hasn't had this problem because they are well manufactured :P lol.
May post piccies later but you can kinda figure it out from the words, so there isn't really any point in doing so.
Now you can play with a guitar rather than the 360 controller pad. I got the achievement for finishing it on hard or expert with the pad, I haven't finished hard yet, work it out O_o lol.