Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: m@DDm!k3 on September 20, 2008, 03:17:55 PM
-
well i was fixin up another rapidfire nochip controller when i noticed that the r trigger didnt fir or the modded button i think the problem might be that i couldnt of burnt a the path to the point where u put the second wire for the trigger what shud i do :help: thx
-
i had that problem with 1 of my mods. all you have to do is look at were the three pin thing is. (https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.psp-help.net%2FOldWirelessBoardTop-1%2520help.jpg&hash=4dbfed9754dec1397b55a5da95273ff1ca53164b). make sure there is not a bridge between the pins circled.
-
no there isnt i think its the path to the second pn though got burned off sometimes it shoots out of random almost as the resposce is delayed... :help:
-
*bump*
-
this happen to me make sure there is not to much soder on the middle pin and make sure there not touching the other pins
-
im guessing that one of the points are bridged on the trigger and/or not making a good connection, try just heating up the solder on all 3 points this might help because some of the solder could not be making a good connection with the traces and if they are bridged, it can reflow the solder back to the points, just check and recheck.
-
thx alot guys ill try this out as soon as i get home from sKoo :dribble: [lol hacked comp to gimme access stupid skool filters]
-
thx alot guys ill try this out as soon as i get home from sKoo :dribble: [lol hacked comp to gimme access stupid skool filters]
lol proxies.....
i actually made one for use at my school :drunk:
it has a username and password on it so people cant leech my proxy without asking, and usually proxies get blocked quick at my school, but this one has been up for 2 years now lol :tup:
-
lol Nice!