Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: Knightsofwar210 on September 27, 2008, 11:14:23 AM
-
Okay like some of you know, I am going to mod the psp camera internally into my psp so I found a switch from my old webcam and I cut it out but I don't know what side is the positive side and which side is the negative side, Here are some pictures.
Here are the 3 pictures - They are high resolution - http://www.mediafire.com/?sharekey=2770a1b3c31ab441ab1eab3e9fa335ca2bb81849a770fb9c
I am trying to use this switch for the led light mod
-
There is no difference :huh:
-
I am going to mod the psp camera internally
trying to use this switch for the led light mod
lol which one.
but yea there is no difference :tup:
-
I meant that can I use that witch for the leds or the camera but no at the same time, which is the positive and which is the negate place that I need to solder because I have no clue where to solder.
-
Where do I solder on that switch?
-
don't double post, negitive and positive dose not matter on a switch but thats a 3 pole switch the middle is the anode and the cathode switches from the left or right pin as you slide the switch so the middle and either side and it will be an on/off switch