Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: guruthe on October 20, 2008, 11:40:43 AM

Title: Glue points on controller board
Post by: guruthe on October 20, 2008, 11:40:43 AM

Hi Guys,

Been looking threw forums but can't find what looking for.

Just wondering if there any links to Glue points (for the rapid fire) ie to ensure cable stays in one spot.
Just don't want to glue somewere and cause a fault.

Hopefully something like, picture with marks were lue can be applied.

Thanks you GUYS....


G

Title: Re: Glue points on controller board
Post by: Winterz117 on October 20, 2008, 11:55:21 AM

just use a little hot glue where you think it would help, theres really no guide for it because its so simple

Title: Re: Glue points on controller board
Post by: 802Chives on October 20, 2008, 12:01:50 PM

Hot Glue will not cause a short or a fault.  Check out king_mike's install tutorial:
https://www.acidmods.com/forum/index.php?topic=23967.0 (https://www.acidmods.com/forum/index.php?topic=23967.0)

He uses hot glue to protect actuall connections as well as for keeping wiring under control

Title: Re: Glue points on controller board
Post by: gameroms on October 20, 2008, 12:43:21 PM

and if you even need to remove hotglue froma a point and your afraid you will mess the via or trace up, a drop of ACETONE will make hot glue removal a snap.

Title: Re: Glue points on controller board
Post by: guruthe on October 21, 2008, 12:01:04 AM

Thanks VERY MUCH you guys..!
Hopfully I'll be able to help someone else soon.

Thanks

Title: Re: Glue points on controller board
Post by: Winterz117 on October 21, 2008, 11:57:19 AM

yeah i put hot glue on all the loose connections, like tact switches, power points......