Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS3 => Topic started by: blackburn on October 26, 2008, 05:11:57 PM
-
As the topic says, please guys i need this asap :tup:
-
Your multimeter knows.
Assuming the PCB layout is only dual layered, then you could trace them straight from the fpc termination through the vias up onto the top layer of the motherboard, and into the beautiful test points.
-
im sorry but that made no sense, talk in layman's terms.
there should be a tutorial on another modding site, xbox-scene does more PS3 controller stuff.
-
im sorry but that made no sense, talk in layman's terms.
there should be a tutorial on another modding site, xbox-scene does more PS3 controller stuff.
Okay, Use your round things called eyes, trace the buttons from the ribbon thingy onto the circuit board, and follow the lines until it comes into a gold circle.
And yeah, the hardcore modding site could find you it.
-
ive checked on xbs and they dont have it, ive even posted there. i tried soldering it to the locations that i did by counting pins again, but first off, they werent correct, and second even the smallest wire cant be put on the header because its pressure sensitive, so the wire gets in the way, ive even tried to get as far away from it as possible with no luck