Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS3 => Topic started by: ApheX on October 28, 2008, 10:12:43 AM
-
hey guys i'm trying to add an led to the ps button on my ps3 controller but i have the second version mobo. i've searched the net and only found information on the 1st and 3rd (rumble) controllers. has anyone here modded the second type of ps3 controller? if so where are the = and - points? i've already replaced the red indicator led to blue but this has stoppped me in my tracks.
-
i don't think anyone here has, try www.xbox-scene.com (http://www.xbox-scene.com), PS3 mods are more rife there.
-
had a look but i didn't find anything. thanks anyway. damn multimeter! if that piece of :censored: :censored: was working i'd test the board. :angry:
-
I will help you :)
Take the Power straight from the battery connector, and the ground from anypart of the board that isn't a trace, just scratch off the insulation there, or look for a test point connected to the same big plane.
-
Thanks Alien! I'll try that now. :)
-
are you talking about the second type six axis controller ?
-
thanks alien but i didnt know i conected direct to battery and use a switch ima do it aliens ways
-
got it working, looks great! Had to used a 100k ohm resistor so the led didn't blow, but the light won't turn off when the controller does. I need a + point on the board that powers up when you press the ps button. that way it should shut off when the controller does. like the mod we all make for the psp, DS, ect.
i'll have a look at the board again, see if i can find a resistor i can solder too for power. if i mess it up....well, it's payday friday so i'll get a rumble controller, but i'd rather not. got a few bills to pay. :(
-Edit-
:censored:, i got my multimeter to work! Thats just saved me a hell of a lot of time getting this set up. :tup:
-
got it working, looks great! Had to used a 100k ohm resistor so the led didn't blow, but the light won't turn off when the controller does. I need a + point on the board that powers up when you press the ps button. that way it should shut off when the controller does. like the mod we all make for the psp, DS, ect.
i'll have a look at the board again, see if i can find a resistor i can solder too for power. if i mess it up....well, it's payday friday so i'll get a rumble controller, but i'd rather not. got a few bills to pay. :(
-Edit-
:censored:, i got my multimeter to work! Thats just saved me a hell of a lot of time getting this set up. :tup:
Sorry aphex, I wasn't thinking straight there, of course it would stay on! Stupid alien.
Well good thing you got the multimeter working.
-
Yeah its basicly like if you solder it to the metal cages protecting the analogues.
-
Is the 2nd version the one with the tilt board mounted to the mobo? If so you can get power and ground from it on the underside where it mounts to the mobo without using any resistors if your using smd's