Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: HellReborn on October 29, 2008, 11:49:36 AM
-
i was wondering if it was possible to take a slim screen and put it in a Fat? would the mobo accept it? i know i would have to redo the ribbon cable but thats ok.
-
I posted this questioned a while back and techinically yes you can put it in the ribbin cables have the same amount of lines as the phat one but smaller, so you'd have to be an extremely good solderer or somehow connect the slim's wires to something that can connect into the fat psp.
-
ok cool thanks so the ribbon cable is the key. what about the case that holds the fat screen will it hold the slim screen?
-
no you cant, they have diffrent hardware, power needs, blah blah blah
Even you where going to solder wich is no easy task
It wouldnt work
-
alright then thanks
-
All that, and the screens take different programming to work. So apart from the intense soldering skills, you would need some good software engineering background too.
-
...they have diffrent hardware, power needs, blah blah blah...
...the screens take different programming to work. So apart from the intense soldering skills, you would need some good software engineering background too.
Do you guys have a datasheet or link to where you are getting this information? I am not doubting you, I am interested because I was never able to find a datasheet or much technical info for the slim's LCD.
-
Do you guys have a datasheet or link to where you are getting this information? I am not doubting you, I am interested because I was never able to find a datasheet or much technical info for the slim's LCD.
no
thats ALOT OF WORK just to run a slim screen in s phat, not worth it
-
yeah but i think it will be worth it in the end
-
....Why? It's the same damn thing. You would go through all the effort and probably fail. If you are a soldering god and managed to do it, though, then the screen would be all buggered and probably wount fit in right, and the ribbons would be stretched.....It'd be a mess.
And, Ive tried an LCD swap just even between a TA-079 and TA-086 mobos, and the old screen with the newer mobo had a very dim backlight. It was still on, just very low, and needed a flashlight to see properly, so I would assume the Slim screen would be buggered in a fat PSP.
-
Do you guys have a datasheet or link to where you are getting this information? I am not doubting you, I am interested because I was never able to find a datasheet or much technical info for the slim's LCD.
It is just guesswork, he hasn't measured the screen voltages or anything.
-
i mean yeah dude it was just an idea i haven't done anything yet to it.