Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: KEIJOIRMELI on November 05, 2008, 10:39:42 AM

Title: Help a newb out, clear case install.
Post by: KEIJOIRMELI on November 05, 2008, 10:39:42 AM

so i bought the clear case and now im trying to install it.

1. my power switch is tight, needs bit force to move up and down. what would help?
2. am i ok without the whole umd drive thing?

Title: Re: Help a newb out, clear case install.
Post by: Knightsofwar210 on November 05, 2008, 10:58:06 AM

Uh you want your power switch tight, that way you don't accidently turn on and off your psp and I'm not sure what you mean after that. Did you put your UMD Drive into your new case? Or you can't take off your UMD Door to replace it with a clear one?

Title: Re: Help a newb out, clear case install.
Post by: tapdisbong on November 05, 2008, 12:39:54 PM

if the power is tight try chipping of a little piece, some clear cases are smaller than originals, ya your ok without the umd drive.

Title: Re: Help a newb out, clear case install.
Post by: rceckspurt13 on November 05, 2008, 03:55:57 PM

if you want to play umd disks, you need to have the umd drive in. If u don't use umd's then you can remove it with no problems.

Title: Re: Help a newb out, clear case install.
Post by: KEIJOIRMELI on November 06, 2008, 11:35:55 AM

thanks for replies, i did put the umd drive on clear case, fixed my power switch and i meant it was REALLY tight compared to original.

like if i move it up, it wont come down.

but all fixed, thanks.