Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: thanks28 on November 06, 2008, 06:04:53 AM

Title: What is the best wire to use for modding?
Post by: thanks28 on November 06, 2008, 06:04:53 AM

I used 30 for the last mod but it is too big. What size should I use and what stores sell it.

Title: Re: What is the best wire to use for modding?
Post by: RoBot1ks on November 06, 2008, 06:15:13 AM

30guage IS the best
Magnet wire is a little thinner than insulated kynar tho  :tup:

Title: Re: What is the best wire to use for modding?
Post by: thanks28 on November 06, 2008, 09:36:41 AM

Would the really small telephone wires not work really well?

Title: Re: What is the best wire to use for modding?
Post by: RoBot1ks on November 06, 2008, 09:48:49 AM

Telephone wires? hmm. It should. as long as they are insulated
Like the wires in this...
http://www.flickr.com/photos/zaxer/24678916/ (http://www.flickr.com/photos/zaxer/24678916/) ?

Title: Re: What is the best wire to use for modding?
Post by: thanks28 on November 06, 2008, 10:12:55 AM

yeah thats what I was talking about. they are smaller so I think they will fit inside better

Title: Re: What is the best wire to use for modding?
Post by: RoBot1ks on November 06, 2008, 10:17:22 AM

yeah, that should work  :tup:

Title: Re: What is the best wire to use for modding?
Post by: pm666drummer on November 27, 2008, 09:07:46 AM

30AWG is standard; kynar is best if you're not doing modchip mods. otherwise you can use magnet wire.  if you want your wires to get through the TINY holes in the powerboard and mobo, use 32AWG