Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: Nemesis on November 06, 2008, 12:18:52 PM
-
Well i change the ring of light on my 360 to blue, it worked perfectly and then i saw some smoke :O, now my leds wont light up at all, is there some kinda resistor/s i should bridge as the smoke didnt seem to be coming for the leds and the leds look perfectly fine.
-
Where was the smoke coming from? Also, did you made sure that while you were soldering, that a bit of solder might have fallen some where near the circuit board. It sounds like you have a short somewhere. Please, double check your LED solder job.
-
my soldering is just fine, the smoke came from behind the board.