Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: xbox hacker on November 06, 2008, 04:54:36 PM
-
Hey everybody, i just finished my 360 controller mod. I used a PIC 12f683, and have a potentiometer to adjust the frequency setting of the PWM for the rapid fire!! :tup:
This way i can dial it in for Halo3, to get the fastest fire rate! The frequency of the PIC should be from 500Hz to 25KHz.
I would invite everyone to develop their own code! I used Proton PIC basic....its so simple!!!!! its only about 6 lines of code :hifive:
SORRY ABOUT THE BAD IMAGE ....its from my phone :huh:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fdesignstudioexpress.com%2FImage013.jpg&hash=77a44ad8c45848412b8df189d16be4606830c9fd)
-
awesome job. i would definitely try to take some REAL pictures next time though
-
what is the code you wrote doing? you may just as well use a 555 the 12683 is used so you can have a fixed fire rate, or multipul fire rates for that matter. this is kindof defeating reaseons for having the 683. but ok, at least you were good enough to get it to work. to each his own