Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: PcPsp13 on November 28, 2008, 11:45:38 AM
-
Ok, i bought a kinda :censored:ed psp for 40 euros, it doesnt charge because the charge plug is :censored:ed, but i can fix that, but the R trigger also doesnt work, i cleaned the thing where the rubber comes on when its pressed, but it still doesnt work, what could i do, or do i have to replace it?
Srry for bad english ^^
-
check if the copper tabs on the motherboard are normal,
if so replace the ribbon cable ;)
-
check if the copper tabs on the motherboard are normal,
if so replace the ribbon cable ;)
What do you mean with copper tabs?
My english sucks, so srry if its a dumb question Dx
-
What do you mean with copper tabs?
My english sucks, so srry if its a dumb question Dx
The zif connector, see if it looks normal like no pins smashed (lol)
-
The zif connector, see if it looks normal like no pins smashed (lol)
Checked the connector and it looked normal, all pins are as they should be,
but, the ribbon cable also looks normal so. :dntknw:
-
Someone? :beg:
-
replace it wit this http://www.dealextreme.com/details.dx/sku.4058 (http://www.dealextreme.com/details.dx/sku.4058)
-
He just said his cable looks fine. Also, don't double post.
-
check your rubber thing contact, check your zif it might have broken or the black likes might have had got cut.
-
even when the ribbon cable LOOKS good it might still be broken.
-
I dunno what the heck is wrong, today on school i was playing GTA Vice City Stories with some friends, and it worked for like 5 seconds, and then again it didnt work :dntknw: