Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: Roxas on November 29, 2008, 03:00:14 AM
-
I would like to put leds in my l and r triggers, that i could turn on with my wifi switch. I know that i need to use a resistor (10 ohm was it...?). If anyone could post a picture on how to do it. Thanks!
-
Search is your friend
https://www.acidmods.com/forum/index.php?topic=10815.0 (https://www.acidmods.com/forum/index.php?topic=10815.0)
-
Search, you'll find it XD like wha I did b4
There's tut outside this thread I think, yea 10 Ohm
-
Search, you'll find it XD like wha I did b4
Please dont spam..
And if you wanted sound reactive leds yeah that's perfect, But if you didn't, You wire the Wifi switch the same groud is pin 3 bridge 1&2
And you can use any + i would recommend the 5 volt because the leds are really bright when they run off it :winker:
Just use the correct resistor, www.ledcalc.com (http://www.ledcalc.com)
-
Search is your friend
https://www.acidmods.com/forum/index.php?topic=10815.0 (https://www.acidmods.com/forum/index.php?topic=10815.0)
I dont want sound reactive LED's. Just normal leds that i can turn on and off with the wifi switch. But anyway thanks for the reply
Please dont spam..
And if you wanted sound reactive leds yeah that's perfect, But if you didn't, You wire the Wifi switch the same groud is pin 3 bridge 1&2
And you can use any + i would recommend the 5 volt because the leds are really bright when they run off it :winker:
Just use the correct resistor, www.ledcalc.com (http://www.ledcalc.com)
So i basically bridge the pins 1 and 2 from the wifi switch and connect the - from my led to the ground and the plus to a 5 volt spot. And how do i do it with more than 1 led? Sorry if i am a total noob ^^. And thanks for the reply!
-
with pleasure...but i dont have a picture of that :sadno:
-
If you need a picture I can draw you one...
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi57.photobucket.com%2Falbums%2Fg219%2Fl0rdnic0%2Fwifileds.jpg&hash=118fc768730604b9b1a658fce630f5e2d9569224)
There you go if you gots questions look me up.
-
Thanks Nico! I'll start modding it right away
-
If you need a picture I can draw you one...
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi57.photobucket.com%2Falbums%2Fg219%2Fl0rdnic0%2Fwifileds.jpg&hash=118fc768730604b9b1a658fce630f5e2d9569224)
There you go if you gots questions look me up.
Thanks! But one n00b question.
How/where do you connect the mod so it has power?
Do you just toss a 5v battery in there or is there a place where you can connect it to the PSP 2000 as a power source?
Also, by bridging the wifi 1 & 2 pins makes the wifi always on right?
sorry for the n00b question...
-
Thanks! But one n00b question.
How/where do you connect the mod so it has power?
Do you just toss a 5v battery in there or is there a place where you can connect it to the PSP 2000 as a power source?
Also, by bridging the wifi 1 & 2 pins makes the wifi always on right?
sorry for the n00b question...
rubs forhead
he meant the 5 volt spot INSIDE the psp, there are a few, 3 by the on led, 2 by the wifi led from what I remember
-
how do you get the leds into the triggers and can u have only up to 5 volts per certain point or more? also does wifi stay on always or switch still works? and where are the points in psp slim picture would be nice