Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: tomrem on December 01, 2008, 02:41:48 AM
-
Sorry if this has been asked and answered, searched, didnt find what I needed so im gonna ask. Been repairing PSPs for a few months, and ive had a few motherboards go bad on me for no apparent reason, while swapping out the guts sometimes, or replacing a UMD drive (more on that in a bit). Is there something im missing? Im not damaging them in anyway but a few just stop working. Any help would be nice, been trying to figure out why on my own, and decided to ask for help.
Also, bought a few UMD drives new, usually just rummage thru another PSP for em, and they said you have to solder an anti-static point on the ribbon cable. Is there a tutorial out there for this?
Thanx, Tom.
-
try and run the mother board and wifi board and power board together out of the psp housing, connected to a battery. also connected at least 1 PSP speaker. if u hear somthing, your Mobos good. its just shorting somehwere, or its not nestled in the right spot. i usually never reinstall the metal shield befind the mobo / on top of the wifi board. if it makes contack with a point on the mobo, usually u get this problem. i never reinstall, and have no problems with out it.
Now to UMD drive.
you dont need to sodler anything. the connector form the drive to mobo is a ZIF connector, and mine work perfectly line with out any "soldering"
-
Tyvm. Found some info here which has proven invaluable (backlight fuse), which is the reason 2 of my mobos werent working. And the UMD drives are garbage, ordered 2 new from Yallstore and both are crap, non working.
But thanx for the response, also working on a pet project mod and hopefully with some luck will be done in a few weeks.
Another question, anyone have a link of ag ood place to get LEDs and other parts for PSPs? Where I dont have to order from 9 different places to get what I need. Thanx again.
-
dealextreme.com (http://dealextreme.com) is good for PSP parts, cases, screens, buttons, etc.
coolmods.co.uk (http://coolmods.co.uk) is aboit more expensve than DX, but the quality is superb
http://cgi.ebay.com/20-x-0603-smd-red-yellow-blue-white-green-led_W0QQitemZ350135034495QQcmdZViewItemQQptZAU_B_I_Electrical_Test_Equipment?hash=item350135034495&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318 (http://cgi.ebay.com/20-x-0603-smd-red-yellow-blue-white-green-led_W0QQitemZ350135034495QQcmdZViewItemQQptZAU_B_I_Electrical_Test_Equipment?hash=item350135034495&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318)
is who i buy my LED's from. and its free shipping so u cant go wrong with that!
-
haha psphax i get my leds from the same guy he has the best prices like 100 red leds for only 3$ buy alot of leds any youll save shipping since he only dose priority shiiping sho its 5 extra $