Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: PhenomenalDesigns on December 04, 2008, 11:38:50 PM
-
Basically, on a MOtherboard i bought off ebay, it has a broken wifi switch, when I looked at it, there was no wifi switch at all and only 1 contacts, im good at soldering and stuff, but how would I fix this?
Ill add pictures tonight to show you guys
-
ohhhhh you cant fix that
since there are pads missing
-
It may be posible to solder tiny bits of wire to the traces that used to lead from the tabs and a wifi switch, you will need to glue the switch with epoxy or somthing stong since only 1 solder tab is left. Oh and just incase you didn't know you will have to scratch some of the green insulation off the traces you want to solder to (only through to the copper tho).
-
Theres no switch, so I just want it to be constantly switched on, which pins would I need to do this?
Things like this,
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi302.photobucket.com%2Falbums%2Fnn89%2FAphexJew%2Ftester-1.jpg%3Ft%3D1225325762&hash=e14e8dc4448a5b100cc6f41a26bcf6432f9a2064)
I cannot tell which sides to solder to, do I solder the 2 bottom pads or the 2 top pads?
-
Depending on what the remaining pad is you may not be able to do that at all
-
Depending on what the remaining pad is you may not be able to do that at all
I Just scratched them down with a sharp x-acto knife and reached copper :)