Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: bustinthejustin on December 13, 2008, 11:03:07 PM

Title: Powerboard led points confusion
Post by: bustinthejustin on December 13, 2008, 11:03:07 PM

Hey guys, I just realised that there are two powerboard pinouts in the tut section, but both shows different points. One shows that the positive is closest to the zif connector, the other says that the positive is farthest from the zif connector. Look:


(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg523.imageshack.us%2Fimg523%2F8489%2Fpowercopytr4.png&hash=2a269782f23fe4218d1c2d6264dcdbfd417cf680)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fbeardmods.com%2Facidmods%2Ftuts%2Fpsp%2FPSP%2520Slim%2520Powerboard%2520Info%2520by%25204dP.jpg&hash=79e050161a4910a228ef1ddb4dfc56acc106b198)

Title: Re: Powerboard led points confusion
Post by: DarkShot on December 14, 2008, 12:29:14 AM

I used 4dp's pinout and had no issue.

Thats the one you aught to follow.

Title: Re: Powerboard led points confusion
Post by: 123sample on December 14, 2008, 01:03:27 AM

all of them are correct, I had a problem before because I did some short circuit,

make sure you did it correctly, and double check..

should be fine..

Title: Re: Powerboard led points confusion
Post by: bustinthejustin on December 14, 2008, 04:13:42 PM

Quote from: 123sample on December 14, 2008, 01:03:27 AM

all of them are correct, I had a problem before because I did some short circuit,

make sure you did it correctly, and double check..

should be fine..

They can't both be correct... But thanks Dark.

Title: Re: Powerboard led points confusion
Post by: 123sample on December 15, 2008, 03:57:58 AM

Just use 4dp..

reliable..