Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: Sanctus on December 15, 2008, 06:22:14 PM
-
When I opened my psp today to check a problem I was having with my powerboard I found that half of my powerboard ribbon cable connector on the mobo had come off. I still have the over half but there are some pins missing from it. Idk what to do T_T So I need some help on how to fix this problem without buying a new mobo or connector. Thanks
-
Im pretty sure the only way is microsoldering :dntknw:
-
Im pretty sure the only way is microsoldering :dntknw:
So can I solder wire from the ribbon cable to the points where the connector was?
-
I advise u not too....
Unless you have a microscope.... and a very thin tipped soldering iron...
-
I advise u not too....
Unless you have a microscope.... and a very thin tipped soldering iron...
Well Idk how else to do it. So it's my only option?
-
Try if you want, but if it doesn't work, don't blame me ]:
Why don't you just get a new one?
Its not THAT expensive, is it? :dntknw:
-
Try if you want, but if it doesn't work, don't blame me ]:
Why don't you just get a new one?
Its not THAT expensive, is it? :dntknw:
Do you mean a new connector? Well They aren't expensive but
1. Idk where to buy them
2. I can't buy stuff online atm
3. I don't know how to install it
-
you can get it brand new from dealextreme,
It's not that expensive seriously..
It's useless connecting those things, wasting time & not worth it..
I suggest it would be much better to get a new one,,
-
Can you give me a link please?
-
http://www.dealextreme.com/details.dx/sku.13051
Have a look around..
-
http://www.dealextreme.com/details.dx/sku.13051
Have a look around..
nono. It's the one on the mobo.
-
I know what you mean,
Hope this help..
There you go:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg509.imageshack.us%2Fimg509%2F641%2F75568494tc0.jpg&hash=0d988edf15494923147952f9de078e2325391033) (http://imageshack.us)
So, you know how it works,
I Think you will need to make a tiny connector, not that hard, like picture above, the red thing..
you will need to make as much as you've lost,
About the clip, dontt worry about that, just solder it straight each pins..
Everything should be okay..
GhoSt:Please don't double post, Just edit the original one :)
-
So, you know how it works,
I Think you will need to make a tiny connector, not that hard, like picture above, the red thing..
you will need to make as much as you've lost,
About the clip, dontt worry about that, just solder it straight each pins..
Everything should be okay..
I don't really understand that picture tbh.. xD
-
The picture AND your post made almost no sense. Also, don't double post...
-
Do you mean a new connector? Well They aren't expensive but
1. Idk where to buy them
2. I can't buy stuff online atm
3. I don't know how to install it
Hey just a heads up Sanctus, http://newzealand.rs-online.com/web/ (http://newzealand.rs-online.com/web/) This is a great site for electronic parts ect. In New Zealand. Probably have the part you are looking for, as for installing a new zif connector...
-
ok thanks. But what exactly am I searching for? And how do I install them? Because if it's really hard I might as well not bother.