Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: ProperBritish on December 19, 2008, 08:32:16 AM
-
im going to grab me a secondhand phat, and buy an Akari PSP MultiColour LED modchip.
What im asking is, anything else i should do?
suggestions ppl, suggestions :)
-
dual nub
amped speakers
cr-3100/cr-5400 and place a sd slot were the original ms goes and one in the umd area
-
i dont know about SD instead of MS Pro where the slot is, as the akari goes above that board. dual nub = oh yeahhh, speakers :dribble: , ill see if that dual SD reader for the UMD drivespace, about prices.
-
external controller
-
external controller
that is pushy wit all the wires u will have for that board but it would be awesome to be able to control the mods wit the controller
-
I'll eat my hat if he can do an external controller.
Do something simple, like a jewel and a trigger mod, that will get you started :#1:
-
I'll eat my hat if he can do an external controller.
Do something simple, like a jewel and a trigger mod, that will get you started :#1:
Yeah i agree with Alien on this one. External Controller doesnt go for him :D Start warming up with trigger mod or such then every day or two change stuff around until you can mod again (Have you modded before?)
And honest the Akari is a hard install,
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.xtremtuner.de%2Fmodding%2Fakaripsp%2Fenglish%2Fdiagmcv017981.jpg&hash=ea03d1867468d5ef1ed707b817a5340c49294185)
One of the hardest mods on PSP next to the external controller.
Good lucks
-
Try installing an undiluted platinum - lucky I have a microscope :#1:
-
to be fair lads, im ambitious, and i dont want to do an external controller. akari, i think i can do it. just need a smaller point soldering iron, and a set of helping hands.
cant get stuck on super easy mods all the time, im taking the plunge :D
just gotta save up some wages.
-
You don't want to go too small, the side of a soldering iron tip is used for soldering, not the end.
You should pickup a microscope, would help, maybe a variable temp iron too.
-
wowo i wish i had known before about the undiluted platinum its pretty cool.
-
Dude..That multi-color led modchip is the best thing iv'e seen :boxed:
I say go for it. It wouldnt be too hard if you had pretty good soldering, wire management skills.
I will do that one day :tup:
-
wowo i wish i had known before about the undiluted platinum its pretty cool.
Yeah but not particularly useful unless you majorly fked up your mobo...
-
tbh i can pick up a phat pretty cheap nowadays, so if i break it it wont bother me too much.
-
don't do the undiluted platinum..... its worthless if u already have cfw...... why go hrdmodding when you can get the same results much easily and cheaper with softmod lol... and yea do the AKARI mod.... its sweet... or try an internal cam or a spinner would be cool...or a speaker...its up to you :winker:
-
Do internal cam, Akari, bunch of led mods (triggers, speakers, buttons, swaps, door, etc.) and then top it off with a sweet jewel from Ken. :tup: I think push activated triggers would look pretty sweet too
Bhawan, I think the undiluted platinum is useful in some cases even if you do have cfw such as when you destroy your flash in an unrepairable way.
-
or you could go all out with the umd door and put a speaker in and somehow have a jewel that lights up with a spinner over the top, now that would look cool XD.
-
But, when you destroy your flash in an irreparable way, you can always physically replace it without a u.p