Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Nintendo DS => DS Lite => Topic started by: xtrememodder on December 19, 2008, 12:29:44 PM
-
Hi all :winker:
I am new to this Forum.
And I wanted a good starting point on my project.
So I will explain:
I use a Pulsevu 2 and i install so.
the problem is that when I ve use the button to calibrate it, that does not work.
I use the following tutorial:
http://censored.com/forum/index.php?topic=172.0 (http://censored.com/forum/index.php?topic=172.0)
For the button, I did the right thing:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fdiy.sickmods.net%2Fimages%2Fpulsevu-SW-button.png&hash=202b595e7d4d8abb9204d77b7dae1e81d820ab77)
Here are the photos I took, everything is in good order, the Led fader works and the pulse but also without calibration.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.noelshack.com%2Fuploads%2FDSC_0060014763.JPG&hash=27d26d641ea039fdb23c961c83ba4f73d8010335)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.noelshack.com%2Fuploads%2FDSC_0061093447.JPG&hash=4a2d18fe2eca1c8e99b9d408e4304b3c7e0d4c9a)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.noelshack.com%2Fuploads%2FDSC_0063024430.JPG&hash=b4e09c7d7d1d6770c1f92624befbe75e75449ffa)
Thanks you for your help :)
-
...what's the problem?
Just follow this like timmy posted:
The following video is half demonstration half tutorial, the tutorial half showing you how to callibrate your PulseVU 2 to handle the DS Lites audio, it comes pre callibrated to the nintendo Wii. Be sure to pay atttention to the video and do BOTH callibrations and you will be fine ;)
The SICKmods callibration MP3 is available here
http://diy.sickmods.net/files/calibrate_pulsevu2.mp3 (http://diy.sickmods.net/files/calibrate_pulsevu2.mp3)
Video 1: Callibrating
http://www.youtube.com/watch?v=GXajTO5ylXE (http://www.youtube.com/watch?v=GXajTO5ylXE)
Video 2: Demonstration
http://www.youtube.com/v/AT1fqnIvirU (http://www.youtube.com/v/AT1fqnIvirU)
-
i will post a movie later to show my problem.
-
hmmm it seems to me you dont fully understand what the switch does
if the music pulse is working then that means the chip IS calibrated. Calibration means you set the lowest and highest possible audio levels which sounds like its done.
what happens when you push your button?
-
my problem is that when I want to press the button switch, I do not get flashes of light.
If everything is off, and I support that 1 in the button, the LED will fade. And if I still leaves support, I do not get the different modes.
Just after posting this answer, I'll make a video.
Thank you
edit:
-=Double Post=-
This is my problem, i have recorded this on youtube.
1) http://fr.youtube.com/watch?v=tvmYrjocyEs (http://fr.youtube.com/watch?v=tvmYrjocyEs)
2) http://fr.youtube.com/watch?v=8hxJdbeGw6A (http://fr.youtube.com/watch?v=8hxJdbeGw6A)
Please use flash with my videos, i don't know how to :x
Thanks
Kicks: Don't double post. Especially not consciously.
-
it sounds like either a problem with your soldering or a problem with the chip
it may have been sent to you faulty or soldering at high temp may have damaged it, or there could be a short or loose collection
but yeah, your right thats not normal. the areas to check would be the PO and SW pads, and just to be sure do you have the pulse vu 2 or 2X.
my reccomendation for what its worth is to post all the info you've posted here in the sickmods forums on there site
i never encountered that problem and thus im not much help sorry :(
-
I do bought a Pulsevu 2x for DS Lite??
It work? because I've never seen a Pulsevu 2x in a DS Lite..
If i buy this, can you help me for instal it?
PS: i have a Led fader deluxe, but all link for the tutorial is dead, where i can found tutorial for DS Lite?
Thanks you very much.
PS (2): i use a 11W soldering iron, it's not high tempered solder i think..
-
That soldering iron is fine.
And...that tutorial is for the Pulse VU2 not the 2x...
-
yes I know, but I compared the different connection and a few seem almost the same between Led fader deluxe (which I tutorial) and pulsevu 2x.
Wwhy no PSP or DS Lite hast been Pulsevu 2x?
Thanks
-
ok, the pulsevu 2X isn't a good choice they make it VERY clear on the sickmods website that it is ONLY to be used in an xbox 360
it has two extra pads which are only for the 360 Ring of Light, pointless in every other console. so no, dont buy one unless you plan on using it in a 360, just stick with the pulse vu 2.
now with regards to tutorials i was in the process of switching sites as i wasn't very happy with the atmosphere here so i moved them to this place
http://censored.com/forum/index.php/topic,172.msg1027.html#new (http://censored.com/forum/index.php/topic,172.msg1027.html#new)
but im back at acidmods now and ill be moving it back over here. im going to be redoing my fader tutorial for the new sickmods fader soon enough.
cheers
-
Thank you very much,
but I haven't got Sickmods Fader, I have only the Led Fader Deluxe. Will you make a specific tutorial on this one?
Otherwise, I order a Pulsevu 2x in sickmods.
So I'm sure I'll use this one.
And for the fader, I will use both the deluxe Led fader for the union.
When your tutorial will be ready?
Thank you very much, goodbye.
-
but I haven't got Sickmods Fader, I have only the Led Fader Deluxe. Will you make a specific tutorial on this one?
hmmmm i do have one spare, we'll see man
Otherwise, I order a Pulsevu 2x in sickmods.
So I'm sure I'll use this one.
DONT ORDER A PULSEVU 2X FOR USE IN THE DS!!!!!! ONLY THE PULSEVU 2!!!!!!!!
And for the fader, I will use both the deluxe Led fader for the union.
Why would you use the fader deluxe and led fader in union, they both do exactly the same thing??? And the pulsevu 2 you have installed does fading as well!
Thank you very much, goodbye.
Your most welcome <jumps off a cliff>
sorry to seem a little harsh but ive made it very clear twice now that there is no reason to get a 2X, by all means waste your money if you want to, im not here to dictate your life but there is absolutely 100% no point to it. The led fader deluxe and fader point i seriously dont get, they are both faders, why use both? Especially when the pulse vu 2 you are installing does fading?