Acidmods

Acid Mods Community Area => Discussion Boards => General Discussion => Topic started by: buickgnx on December 21, 2008, 07:51:55 AM

Title: what dremel
Post by: buickgnx on December 21, 2008, 07:51:55 AM

what do you use or whats good for a novices

Title: Re: what dremel
Post by: SN!P3R on December 21, 2008, 07:56:55 AM

DONT go with a cordless dremel, they are junk.

http://www.dremel.com/en-us/Tools/Pages/ToolDetail.aspx?pid=Two+Speed+MultiPro (http://www.dremel.com/en-us/Tools/Pages/ToolDetail.aspx?pid=Two+Speed+MultiPro)

^^ that is the one i use. it has low speed when your doing rough cutting grinding, and high speed for when your smoothing stuff out. ig ot mine for 80 dollars, yes, a nut cruncher, but mine is already 3 years old and still going.

Title: Re: what dremel
Post by: buickgnx on December 21, 2008, 08:02:57 AM

im trying to find a lower rpm b/c my dad has a cutting thing like thishttp://www.sears.com/shc/s/p_10153_12605_00917246000P (http://www.sears.com/shc/s/p_10153_12605_00917246000P) and i hate it.

Title: Re: what dremel
Post by: Alien_X on December 21, 2008, 08:34:51 AM

Lol, that is because it is a router/reciprocating saw.

They have way more powerful motors than a dremel

Title: Re: what dremel
Post by: SN!P3R on December 21, 2008, 08:37:05 AM

Quote from: Alien_X on December 21, 2008, 08:34:51 AM

Lol, that is because it is a router/reciprocating saw.

They have way more powerful motors than a dremel

lol, yeah its like a prius next to v-8

Title: Re: what dremel
Post by: buickgnx on December 21, 2008, 08:37:18 AM

ow lol

Title: Re: what dremel
Post by: Jumbo on December 21, 2008, 08:40:19 AM

Quote from: Alien_X on December 21, 2008, 08:34:51 AM

Lol, that is because it is a router/reciprocating saw.

They have way more powerful motors than a dremel

Yeah LOL :taunt: That is for sheet rock, tile, cutting plywood ect ect. Way more than what you need  :x:

Buick, If you get a PROPER dremel you will love it. I have had this- http://www.amazon.com/Dremel-3956-02-MultiPro-Variable-Accessories/dp/B00006JSPB/ref=pd_bbs_sr_6?ie=UTF8&s=hi&qid=1229877381&sr=8-6 (http://www.amazon.com/Dremel-3956-02-MultiPro-Variable-Accessories/dp/B00006JSPB/ref=pd_bbs_sr_6?ie=UTF8&s=hi&qid=1229877381&sr=8-6) for a while, and its amazing. I had one from my dad before that and it was also amazing. Dremel makes stuff that can last (They are VERY well respected) and you will see what i mean after you get one.

And DON'T get a wireless one. They don't have any torque, and you most likely wont be happy with it.

Title: Re: what dremel
Post by: Alien_X on December 21, 2008, 09:11:05 AM

Or, you could make one if you have a lathe  :huh:

Title: Re: what dremel
Post by: buickgnx on December 21, 2008, 09:18:12 AM

where should i buy it from in a store?

Title: Re: what dremel
Post by: Alien_X on December 21, 2008, 09:18:57 AM

yes

Title: Re: what dremel
Post by: bustinthejustin on December 21, 2008, 10:30:25 AM

I see home hardware, walmart, etc. have it... Try all those homeworking/building w/e stores.

Title: Re: what dremel
Post by: buickgnx on December 21, 2008, 10:38:54 AM

is this good? http://www.lowes.com/lowes/lkn?action=productDetail&productId=129666-353-300-1/50&lpage=none (http://www.lowes.com/lowes/lkn?action=productDetail&productId=129666-353-300-1/50&lpage=none)

Title: Re: what dremel
Post by: psp339 on December 22, 2008, 11:39:15 PM

Quote from: buickgnx on December 21, 2008, 10:38:54 AM

is this good? http://www.lowes.com/lowes/lkn?action=productDetail&productId=129666-353-300-1/50&lpage=none (http://www.lowes.com/lowes/lkn?action=productDetail&productId=129666-353-300-1/50&lpage=none)

I just bought the same set 2 days ago and it working great.  :tup: Got mine at target for only $49.99.