Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: juice0187 on December 26, 2008, 04:08:20 AM
-
would the psp loop the gocam if its moded to usb charge?
i know the gocam draws power from the two prong near the usb port but would the psp still draw power from the +5 volt prong on the go cam?
or does the go cam only use -data and +data without the +5 volt and ground?
this worries me since i own a gocam and already moded my psp to charge via usb.
-
i own a gocam and already moded my psp to charge via usb.
then why can't you just try it out...
It won't do anything.
-
then why can't you just try it out...
It won't do anything.
He's asking because he didn't want to risk frying it.
-
thats exactly why i'm asking.
so do any of you two own the gocam?
-
O_O Since when does a psp draw power from the gocam? Or am I missing something...
-
The gocam takes power from the PSP itself, not the usb socket
There are these gold contacts, that power the go cam, whereas the usb socket doesnt power it
-
i know it takes power from the gold contacts on each side of the psp usb port.
but the gocam also has the usb plug and like any other usb cable it also has ground and +5volt pins
in its usb, thats why i asked if it loops the gocam
example of what could happen:
1) the gocam draws power from its two gold pins.
2) the psp being usb moded charges battery from the usb port (in this case the gocam).
3) the psp draws power from the battery.
and this 3 steps will just repeat in a never ending cycle.
kind of complicated but do you get it.
-
erm, ill try it for you now eigh
EDIT:
NO it does not loop the camera the camera works perfectly.
-
Hi , I made the USB charge on PSP , and since cam don't work on his PSP , but work on another PSP......
++
-
thanks for the info FaT3oYCG, i tried it and my cam also worked perfectly.
:tup:
-
i know it takes power from the gold contacts on each side of the psp usb port.
but the gocam also has the usb plug and like any other usb cable it also has ground and +5volt pins
in its usb, thats why i asked if it loops the gocam
example of what could happen:
1) the gocam draws power from its two gold pins.
2) the psp being usb moded charges battery from the usb port (in this case the gocam).
3) the psp draws power from the battery.
and this 3 steps will just repeat in a never ending cycle.
kind of complicated but do you get it.
It wouldnt loop, the go cam wouldnt send any current through the actual USB (Apart from data), although that would be signal, plus the USB charge mod is a Positive, and you wouldnt send a current down a positive (like the wrong way if you get what I mean) also I dont think the charge is 'directly' connected to the battery, i think its connected first to some kind of PIC that will let it charge and when theres no battery, it will use it DC 5V
Also im guessing there are many surface mount diodes to make sure anyway (so you cant flip the battery etc)