Acidmods

Acid Mods Community Area => Discussion Boards => Beginners Corner => Topic started by: pspupgrade on January 01, 2009, 01:13:28 AM

Title: Circuitry Setup?
Post by: pspupgrade on January 01, 2009, 01:13:28 AM

Hi, sorry about this question if it's too nooby, but I couldn't find things the answer on the search.

So, I'm about to do the sound-reactive LED mod along with the hold switch mod, but I'm not sure about the exact circuitry. In a parallel circuit wouldn't the switch not work because, unlike series circuits, they aren't interdependent? Or would I first wire in the hold switch and speakers in a series layout and then complete the rest in the parallel circuit layout?

Thanks in advance.

Title: Re: Circuitry Setup?
Post by: Alien_X on January 01, 2009, 01:49:04 AM

Wire them in parallel, the hold switch pin is your negative.

Title: Re: Circuitry Setup?
Post by: pspupgrade on January 01, 2009, 02:24:36 AM

Thanks for the help. Modding time! :w00t:

Title: Re: Circuitry Setup?
Post by: RoBot1ks on January 02, 2009, 08:54:35 PM

If you were to use the negative from your hold switch, and the positive from your speaker, the leds would not really be sound reactive
I would just use both positive and negative for the leds to be sound reactive