Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: kaz on January 04, 2009, 12:38:34 PM
-
Ok now i know how to put leds in my psp but i want to be sure about the technic i will use!
First of all i will solder the led (to the wire) and then solder the possitive wire of the led with an ohm rezistor (i suppose i need 12ohm rezistor because i want to put 6 red leds about 240-300mcd).
Then i will solder the possitive wire with the +5volt of my mobo!
After all that i take the neggative wire and solder it with the pin of wifi - that is alone!i will also bridge the two
pins that are together like the Greek Ω omega letter and i'm done!
This is the diagram i made yesterday sorry but i haven't free time so i made it with windows drawing!
Also i realize that i have drawn it upside down so yeah ;) i know.....
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fe.imagehost.org%2Ft%2F0850%2Fkazmania.jpg&hash=f0acf32cc783fb99defb4a29b93d26166e0df662) (http://e.imagehost.org/view/0850/kazmania)
My questions are is the technic i will use correct?
How many rezistors i will need and how ohm will it be?
When i'm done soldering the first led do i need to do the previous steps again or i just solder the last five leds to the wire of the first one?
Please correct me if i'm wrong i need help please!! :beg:
-
If you're under the age of 13 i strongly suggest you don't do this. :sadno:
Otherwise, you use this:
http://ledcalc.com/
-
I'm fourteen and i know a lot of about psp modding!
-
Thanks for your help but i finally find out how to do it!!! :w00t:
-
Good luck, lol.
-
We have lots of young modders.. Treemty is 13. I am 13. Luke is 13. We can all mod. Age doesn't mean anything.
Okay, so I can only mod a little. Oh well :laughing:
-
lol you guys are youngens :P im 20 and just getting in to modding.. but im a quick learner!
-
I'm 14 now. I started going to this site when I was 13.. Hence the 13 in my name. I accomplished my first mod and made a tut when I was 13.
-
I'm 14 now. I started going to this site when I was 13.. Hence the 13 in my name. I accomplished my first mod and made a tut when I was 13.
yea same...
w00t I TURN 14 IN 5 DAYS YEAAAAAAAAAAAAAAAAAAAA :w00t: :w00t: :w00t:
-
I turn 14 in... about 180 days.
-
I'm 14 now. I started going to this site when I was 13.. Hence the 13 in my name. I accomplished my first mod and made a tut when I was 13.
I joined this site in april 07 when I was 12. Now I'm 14 too. :tup:
-
I turned 14 back in July. But to get back on topic, I think it's better to use the wifi switch for LEDs because you still can use the hold function. I don't see why you would need to turn the wifi off anyway. It is also simpler to use the wifi switch. No cutting of traces. Also you don't have to worry about accidentally turning your psp off when you turn the LEDs off.
-
I joined this site in april 07 when I was 12. Now I'm 14 too. :tup:
hardcore! i just completed my first mod.. cant test it though :( psp is bricked n i need a smaller MS :P
-
Im almost 15 now, I joined originally like 3 years ago or so...
I was 12 and I did mods then
although I sucked badly since I didnt have all the tools
Although now im quite good :D
-
We have lots of young modders.. Treemty is 13. I am 13. Luke is 13. We can all mod. Age doesn't mean anything.
Okay, so I can only mod a little. Oh well :laughing:
With age comes skill :winker:
-
thats not really always true. I know some adaults who couldn't tell a soldering iron from a screwdriver. Or use one to save their life.
-
thats not really always true. I know some adaults who couldn't tell a soldering iron from a screwdriver. Or use one to save their life.
And I know of some who can reverse-engineer games consoles.
How many children do that?
(Bad example, I know)
-
Hahahaha lol @ alien well im 14 i know iknow but when i started modding about a year ago i screw up a mobo and i had wire manegement problemes