Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: Kilokk on January 09, 2009, 09:10:34 PM

Title: 360 screen size WAY too big...
Post by: Kilokk on January 09, 2009, 09:10:34 PM

my 360 display is to big... how do i change it? i just noticed that there is a LOT being cut off at the sides... can anyone help?

Title: Re: 360 screen size WAY too big...
Post by: psp339 on January 10, 2009, 12:17:01 AM

Is there an auto adjust button on the tv?

Title: Re: 360 screen size WAY too big...
Post by: Kilokk on January 10, 2009, 04:30:17 AM

no...

Title: Re: 360 screen size WAY too big...
Post by: 802Chives on January 10, 2009, 05:41:43 AM

from the dashboard you can try going to my xbox, then to console settings, and then display settings.  From there you may be able to fix it.

Title: Re: 360 screen size WAY too big...
Post by: Kilokk on January 10, 2009, 08:21:05 PM

i tried that...

Title: Re: 360 screen size WAY too big...
Post by: Modded Matt on January 13, 2009, 05:24:19 AM

on the xbox av cable change the switch to normal mode (not hd) and just plug in the yellow, white, and red plugs. then go to the settings and change your display settings to letter box. that should help. some hd tv's (mainly the cheaper ones) just do that, the hd signal is in a pre determined format leingth x width that some hd tvs dont nesecarally support. I have a 58" hd rca that cuts off about an inch on each side, but my 56" pioneer plasma dont do this. this is a sales gimmic to make you think its a bigger tv, it is taller, but not as wide as it should be, for as tall as it is and the tv dont know what to do with the rest of the signal so it cuts it out.

did that make since? try running it in normal mode and see if that helps. you could allways buy a better tv LOL