Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: PhenomenalDesigns on January 11, 2009, 10:43:38 AM

Title: 191k resistors for sound mod
Post by: PhenomenalDesigns on January 11, 2009, 10:43:38 AM: Does it have to be 191k? Cant it be 180k? or 200k? Since 191ks, cant seem to find them in this country, so Id have to get it imported (Â£10, for 1 resistor... gotta be kidding me)

Plus with tolarence, its gonna be around the 200k/180k mark anyway, right?
Title: Re: 191k resistors for sound mod
Post by: rceckspurt13 on January 11, 2009, 11:29:13 AM: Youncan combine other resistors to = 191. For example: 100k + 90 + 1.
Title: Re: 191k resistors for sound mod
Post by: PhenomenalDesigns on January 11, 2009, 01:04:31 PM: Quote from: rceckspurt13 on January 11, 2009, 11:29:13 AM
Youncan combine other resistors to = 191. For example: 100k + 90 + 1.
UK they dont sell 90ks either

Plus I am using SMD resistors, since I make the LM386 fit in thin heatshrink (0603 resistors and SMD LM386 manages to fit in 6mm heatshrink
Title: Re: 191k resistors for sound mod
Post by: ApheX on January 11, 2009, 03:24:42 PM: mate, go to maplin (if theres one in your town or go to there website) and get a 180k resistor. they do work with the Im386. if you wanted, you could get a 10k + 1k from there as well to bring it to 191k.
Title: Re: 191k resistors for sound mod
Post by: LaCozTe-2028 on January 11, 2009, 04:26:12 PM: i use 187k-ohm and they work fine
Title: Re: 191k resistors for sound mod
Post by: PhenomenalDesigns on January 11, 2009, 11:37:15 PM: Quote from: ApheX on January 11, 2009, 03:24:42 PM
mate, go to maplin (if theres one in your town or go to there website) and get a 180k resistor. they do work with the Im386. if you wanted, you could get a 10k + 1k from there as well to bring it to 191k.
I got some 180K SMD resistors which I was planning to use, and Since I want to make it small as possible, will it be fine?
Title: Re: 191k resistors for sound mod
Post by: ApheX on January 12, 2009, 02:40:45 AM: Quote from: PhenomenalDesigns on January 11, 2009, 11:37:15 PM
I got some 180K SMD resistors which I was planning to use, and Since I want to make it small as possible, will it be fine?

I don't see any reason why it shouldn't. 180K smd resistor would be fine to use :)
Title: Re: 191k resistors for sound mod
Post by: DubbleDutch on January 12, 2009, 01:49:35 PM: try not to use a resistor higher then 191K ;)
it makes the leds less reactive ;)

you are better of using a 180K resistor then (for example) a 193K