Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on January 14, 2009, 01:50:50 AM
-
so after two weeks of waiting for my clear case to arrive
from dx i'm very excited...but got some frustrations coz some
screws dont fit...the original trim also dont fit..
i tried everything but its useless..
i also have trouble in my power/hold switch and wifi...
i need to cut some part of the power/hold part coz you wont fit the
switch...i also took my umd door off..
after putting it back my lcd display nothing..but there's a sound on the start up
what do you think is the problem..i tried cleaning the lcd socket but still nothing..
help guys.. :beg:
-
I have the same problem, for my case to fit the power button I just took out the original power button and cut into the new trim and the case so that it would fit. And for the wifi button, just leave it on by turning on the switch from the inside. Ive tried to get the screws to fit by opening the screw holes up more with the screw driver and my screen has the same problem as yours. I had to wait 18 days to get my chrome case. Theres something wrong with the plastic that messes up our psps.
-
i went threw much of the same problems , dremeling really helps, i dremeled the power switch because my dx shell wouldnt let the switch make it all the way to hold, and the faceplate that came with it was much to thick because the screen was a seperate peice of plastic glued in place which prevented the home bar from working. after a few mods (a few hours i should say lol) to the trim, internal notches, and one of my other faceplates everything fit together pretty good.
As far as the lcd screen goes i never had the problem maybe to much pressure? did you try it without the faceplate on?