Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on January 30, 2009, 03:18:41 AM

Title: where to wire..
Post by: atomicareprise on January 30, 2009, 03:18:41 AM

i'd like to know where to solder the d-pad points to

analog stick..and where to solder the gound points..

i know now the solder points to do the dual nub

but i don't know this one..help guys.. :beg:

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj153%2Fatomicareprise%2Fjes-1.jpg&hash=b2ef8ac0b036e0ae8a2923d669ee2b4a80bd39ac)

Title: Re: where to wire..
Post by: treemty on January 30, 2009, 04:08:02 AM

Quote from: atomicareprise on January 30, 2009, 03:18:41 AM

i'd like to know where to solder the d-pad points to

analog stick..and where to solder the gound points..

i know now the solder points to do the dual nub

but i don't know this one..help guys.. :beg:

you cannot to a direct wiring from the analog nub to the face buttons.

because the X,O,[] and Y  are all digital and the analog nub is(as its name says) analog,
 what the razor X does is it basically makes an analog-digital converter

so you can only do this if you have a razor X or an A2D board(homemade razor X)(A2D stands for analog to digital)
                                                                     

Title: Re: where to wire..
Post by: atomicareprise on January 30, 2009, 04:42:23 AM

what about using the controller of ps2??