Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Bullet Pulse on February 02, 2009, 12:51:20 PM

Title: Modded controller not charging
Post by: Bullet Pulse on February 02, 2009, 12:51:20 PM

Whenever I plug in my play and charge cord to my self-modded controller (COD World At War RapidFire Kit On triggers CG Install),
the charger light will stay lit for about a minute and then turn green.
When I take off the charger, the battery only lasts for about 2 seconds and then fades out.
I can charge the battery pack completely fine using my other controller and then put it back in the modded controller, so that proves that the battery pack is not defective.
Can anyone figure this out?

Title: Re: Modded controller not charging
Post by: moeiscool on February 02, 2009, 06:47:31 PM

maybe you damaged a pin that allows the controller to charge the battery?
maybe you somehow smacked a pin by the sync button when soldering to it? (if you did solder to it)
really look at your circuit board see what COULD be stopping from charging to happen
theres ribbons that run along the board maybe you ripped one out, its tough but its a possibility.

i hope you fix your controller bullet sucks to get it modded then it screw up :(

Title: Re: Modded controller not charging
Post by: Bullet Pulse on February 03, 2009, 10:40:22 AM

I know it's something wrong with the board,
but does anyone have any knowledge about the controllers
and how they charge and etc.

Title: Re: Modded controller not charging
Post by: moeiscool on February 03, 2009, 05:42:22 PM

check the ribbons in the controllers charge port where the wire goes into maybe they got bent and pushed back and cant make a circuit

Title: Re: Modded controller not charging
Post by: PspKicks316 on February 03, 2009, 06:18:52 PM

Quote from: moeiscool on February 03, 2009, 05:42:22 PM

check the ribbons

There's no ribbons on wireless controllers...
I have 4, and no ribbons.


....

Title: Re: Modded controller not charging
Post by: moeiscool on February 07, 2009, 12:20:56 AM

ok when i say ribbons i mean the thingies
that go along the board
ya know the circuit thingies
those little path way doo hickys
i unno
make sure none of those are
dead in anyway
and the contacts inside the head of the charge input

Title: Re: Modded controller not charging
Post by: Nemesis on February 07, 2009, 05:21:30 AM

Quote from: moeiscool on February 07, 2009, 12:20:56 AM

ok when i say ribbons i mean the thingies
that go along the board
ya know the circuit thingies
those little path way doo hickys
i unno
make sure none of those are
dead in anyway
and the contacts inside the head of the charge input

The circuit traces.

Title: Re: Modded controller not charging
Post by: moeiscool on February 07, 2009, 05:32:04 PM

yes, those thank you.
i know my way around a little but have no idea of the names of things
i used to call capacitors black electro cylinders.... haha