Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: one9gt on February 06, 2009, 06:59:03 PM
-
okay, so i have hazer's code modified for cod5, i built the programmer, bought some 12f683's and tactile switches, and i'm ready to put in the controller... but one question.
do i use resistors or not??? the install diagram that came with the code has pictures of resistors but on another site which shall not be named, their tutorial has no resistors...
so which is it???
-
which site doesnt have it?
-
spark says you need it in the list of items needed... but nowhere in their tutorial pics do they have them
-
not all 12f683's are the same, different chips are programed different ways, if you are using gameplayRF you need to follow the instructions that came with it. if you are using a chip from sparks you need to use their drawings, if you are using king mikes product, you need to use his diagrams, they are all programed for different pin out
just becouse its the same chip dosnt mean it has the same program