Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on February 11, 2009, 09:35:21 PM

Title: pobo's led swap
Post by: atomicareprise on February 11, 2009, 09:35:21 PM

so again before i do the led swap mod i want to azk you guys again for your

expertise on this one :tup:

is this correct??i want to know which side is the + and - is...
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj153%2Fatomicareprise%2Fled11.jpg&hash=f8c253ada1f740454604cd72a7fcc6204bdf8ecb)

and second, is this right way to bridge this??
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj153%2Fatomicareprise%2Fled22.jpg&hash=9f03c75688ed21c7e7235a7e926280fd4d593fee)

thanks guys :tup:

Title: Re: pobo's led swap
Post by: crazyl69 on February 11, 2009, 10:11:59 PM

    The small traces that goes from the 2 resistors to the leds are known to be the (-) side or contact points. The larger area almost underneath the leds is known to be the (+) side or contact point. From the (-) side of the leds both leds will be solder seperate following the small traces and from the (+) side of the leds, both will be solder to the larger area together. Its not really bridging but linking both (+) sides together. Good Luck...

Title: Re: pobo's led swap
Post by: atomicareprise on February 12, 2009, 02:52:47 AM

that means the pics that i did is not correct :tup:

i'll just change and reverse it...thanks man :tup: